# coding=utf-8
 
import logging
import yaml
import os
import sys
 
reload(sys)
sys.setdefaultencoding("utf-8")
 
# 獲取當前目錄的路徑
cur_dir = os.path.abspath('.')
 
 
def check_dt_pacsscp(config):
 """
 用來檢查文件配置是否正確
 """
 #將配置config.yaml配置文件以字典方式讀取
 dts_method = config['service']['method']
 dts_dup_check = config['service']['pacsscp_dup_check_off']
 dts_interval = config['scheduler']['interval']
 #判斷對接方式是否是pacsscp
 if dts_method == 'pacsscp':
  if dts_dup_check == True and dts_interval == 3:
    return True
  else:
    return False
 else:
  #打印error級別的錯誤
  print "\033[31m Error:method not is pacsscp!!!\033[0m"
  return False
 
if __name__ == "__main__":
 # 加載yaml配置
 config_yaml = os.path.join(cur_dir, 'config.yaml')
 with open(config_yaml, 'rt') as f:
  config = yaml.safe_load(f.read())
 
  #dt相關路徑和配置
 dt_path = config['path']['docking-toolbox']
 dt_config_path = os.path.join(dt_path, 'config.yaml')
 with open(dt_config_path, 'rt') as f:
  dt_config = yaml.safe_load(f.read())
 
 if check_dt_pacsscp(dt_config):
  print (u"\033[32m 校驗通過~\033[0m")
 else:
  print (u'\033[32m 校驗未通過, 請檢查配置!\033[0m ')

# coding=utf-8
 
"""
作業要求, 完善check_txpacs_version函數
"""
 
import logging
import traceback
 
import yaml
import os
import sys
import re
 
reload(sys)
sys.setdefaultencoding("utf-8")
 
# 獲取當前目錄的路徑
cur_dir = os.path.abspath('.')
 
def check_txpacs_version(config, constant):
 """
 高難度
 校驗txpacs版本, 若版本<1.4, 則回調中不能出現received_start_timestamp和received_end_timestamp這兩個參數,
 若不合法打印error級別的提示;
 校驗txpacs的自動清理功能是否合法: 若dt版本<1.3.8, 則不做要求,
 若dt版本>=1.3.8, 則要求txpacs版本必須為1.5.1及以上版本, 且txpacs配置的clean_date需配置為正整數
 (docking-toolbox的版本號可以從文件'docking-toolbox/toolbox/utils/constant.py'中讀取),
 若不合法打印error級別的提示.
 根據以上結果, 返回返回值.
 :param config: txpacs的配置
 :param constant: docking-toolbox/toolbox/utils/constant.py文件內容
 :return: True: 通過
    False: 不通過
 """
 # 獲取txpacs的版本號
 jar_file = os.listdir(txpacs_path)
 jar_file.sort(reverse=True)
 jar_ver = jar_file[0]
 jar_version = re.search('txpacs-(.*?).jar', jar_ver)
 #txpacs的版本號
 txpacs_version = jar_version.group(1)
 #docking-tools的版本號
 dt_version = re.search('DT_VERSIONS.*?"(.*?)"',constant).group(1)
 
 #打開txpacs的配置文件
 with open(txpacs_config_path, 'rt') as f:
  txpacs_file = f.read()
 #判斷txpacs的版本號是否小于1.4
 if txpacs_version < '1.4':
  #判斷received_start_timestamp" and "received_end_timestamp"兩個參數是否出現在txpacs配置文件中
  if "received_start_timestamp" and "received_end_timestamp" not in txpacs_file:
   return True
  else:
   print "\033[31m Error:當前的txpacs版本號是txpacs-%s ,不應該存在received_start_timestamp和received_end_timestamp\033[0m"%txpacs_version
   return False
 #如果txpacs版本號大于等于1.4
 else:
  #判斷DT版本是否大于1.3.8
  if dt_version >= '1.3.8':
   if txpacs_version >= '1.5.1':
    if config['store']['clean_date'] > 0:
     return True
    else:
     print "\033[31m Error：txpacs配置文件中clean_date應為正整數 \033[0m"
     return False
   else:
    print "\033[31m Error：當前DT版本大于1.3.8，txpacs版本必須大于等于1.5.1\033[0m"
    return False
  else:
   return True
 
if __name__ == "__main__":
 # 加載yaml配置
 config_yaml = os.path.join(cur_dir, 'config.yaml')
 with open(config_yaml, 'rt') as f:
  config = yaml.safe_load(f.read())
 
 # txpacs相關路徑和配置
 txpacs_path = config['path']['txpacs']
 txpacs_config_path = os.path.join(txpacs_path, 'conf.yml')
 
 with open(txpacs_config_path, 'rt') as f:
  txpacs_config = yaml.safe_load(f.read())
 
 # dt相關路徑和配置
 dt_path = config['path']['docking-toolbox']
 dt_constant_path = os.path.join(dt_path, 'toolbox', 'utils', 'constant.py')
 with open(dt_constant_path, 'rt') as f:
  dt_constant = f.read()
 
 if check_txpacs_version(txpacs_config, dt_constant):
  print (u"\033[32m 校驗通過~\033[0m")
 else:
  print (u'\033[32m 校驗未通過, 請檢查配置! \033[0m')