package smile

import (
  "errors"
  "log"
  "net/http"
  "sync"
  "time"

  "github.com/gorilla/websocket"
)

const (
  // 允許等待的寫入時間
  writeWait = 10 * time.Second

  // Time allowed to read the next pong message from the peer.
  pongWait = 60 * time.Second

  // Send pings to peer with this period. Must be less than pongWait.
  pingPeriod = (pongWait * 9) / 10

  // Maximum message size allowed from peer.
  maxMessageSize = 512
)

// 最大的連接ID，每次連接都加1 處理
var maxConnId int64

// 客戶端讀寫消息
type wsMessage struct {
  // websocket.TextMessage 消息類型
  messageType int
  data    []byte
}

// ws 的所有連接
// 用于廣播
var wsConnAll map[int64]*wsConnection

var upgrader = websocket.Upgrader{
  ReadBufferSize: 1024,
  WriteBufferSize: 1024,
  // 允許所有的CORS 跨域請求，正式環境可以關閉
  CheckOrigin: func(r *http.Request) bool {
    return true
  },
}

// 客戶端連接
type wsConnection struct {
  wsSocket *websocket.Conn // 底層websocket
  inChan  chan *wsMessage // 讀隊列
  outChan chan *wsMessage // 寫隊列

  mutex   sync.Mutex // 避免重復關閉管道,加鎖處理
  isClosed bool
  closeChan chan byte // 關閉通知
  id    int64
}

func wsHandler(resp http.ResponseWriter, req *http.Request) {
  // 應答客戶端告知升級連接為websocket
  wsSocket, err := upgrader.Upgrade(resp, req, nil)
  if err != nil {
    log.Println("升級為websocket失敗", err.Error())
    return
  }
  maxConnId++
  // TODO 如果要控制連接數可以計算，wsConnAll長度
  // 連接數保持一定數量，超過的部分不提供服務
  wsConn := &wsConnection{
    wsSocket: wsSocket,
    inChan:  make(chan *wsMessage, 1000),
    outChan:  make(chan *wsMessage, 1000),
    closeChan: make(chan byte),
    isClosed: false,
    id:    maxConnId,
  }
  wsConnAll[maxConnId] = wsConn
  log.Println("當前在線人數", len(wsConnAll))

  // 處理器,發送定時信息，避免意外關閉
  go wsConn.processLoop()
  // 讀協程
  go wsConn.wsReadLoop()
  // 寫協程
  go wsConn.wsWriteLoop()
}

// 處理隊列中的消息
func (wsConn *wsConnection) processLoop() {
  // 處理消息隊列中的消息
  // 獲取到消息隊列中的消息，處理完成后，發送消息給客戶端
  for {
    msg, err := wsConn.wsRead()
    if err != nil {
      log.Println("獲取消息出現錯誤", err.Error())
      break
    }
    log.Println("接收到消息", string(msg.data))
    // 修改以下內容把客戶端傳遞的消息傳遞給處理程序
    err = wsConn.wsWrite(msg.messageType, msg.data)
    if err != nil {
      log.Println("發送消息給客戶端出現錯誤", err.Error())
      break
    }
  }
}

// 處理消息隊列中的消息
func (wsConn *wsConnection) wsReadLoop() {
  // 設置消息的最大長度
  wsConn.wsSocket.SetReadLimit(maxMessageSize)
  wsConn.wsSocket.SetReadDeadline(time.Now().Add(pongWait))
  for {
    // 讀一個message
    msgType, data, err := wsConn.wsSocket.ReadMessage()
    if err != nil {
      websocket.IsUnexpectedCloseError(err, websocket.CloseGoingAway, websocket.CloseAbnormalClosure)
      log.Println("消息讀取出現錯誤", err.Error())
      wsConn.close()
      return
    }
    req := &wsMessage{
      msgType,
      data,
    }
    // 放入請求隊列,消息入棧
    select {
    case wsConn.inChan <- req:
    case <-wsConn.closeChan:
      return
    }
  }
}

// 發送消息給客戶端
func (wsConn *wsConnection) wsWriteLoop() {
  ticker := time.NewTicker(pingPeriod)
  defer func() {
    ticker.Stop()
  }()
  for {
    select {
    // 取一個應答
    case msg := <-wsConn.outChan:
      // 寫給websocket
      if err := wsConn.wsSocket.WriteMessage(msg.messageType, msg.data); err != nil {
        log.Println("發送消息給客戶端發生錯誤", err.Error())
        // 切斷服務
        wsConn.close()
        return
      }
    case <-wsConn.closeChan:
      // 獲取到關閉通知
      return
    case <-ticker.C:
      // 出現超時情況
      wsConn.wsSocket.SetWriteDeadline(time.Now().Add(writeWait))
      if err := wsConn.wsSocket.WriteMessage(websocket.PingMessage, nil); err != nil {
        return
      }
    }
  }
}

// 寫入消息到隊列中
func (wsConn *wsConnection) wsWrite(messageType int, data []byte) error {
  select {
  case wsConn.outChan <- &wsMessage{messageType, data}:
  case <-wsConn.closeChan:
    return errors.New("連接已經關閉")
  }
  return nil
}

// 讀取消息隊列中的消息
func (wsConn *wsConnection) wsRead() (*wsMessage, error) {
  select {
  case msg := <-wsConn.inChan:
    // 獲取到消息隊列中的消息
    return msg, nil
  case <-wsConn.closeChan:

  }
  return nil, errors.New("連接已經關閉")
}

// 關閉連接
func (wsConn *wsConnection) close() {
  log.Println("關閉連接被調用了")
  wsConn.wsSocket.Close()
  wsConn.mutex.Lock()
  defer wsConn.mutex.Unlock()
  if wsConn.isClosed == false {
    wsConn.isClosed = true
    // 刪除這個連接的變量
    delete(wsConnAll, wsConn.id)
    close(wsConn.closeChan)
  }
}

// 啟動程序
func StartWebsocket(addrPort string) {
  wsConnAll = make(map[int64]*wsConnection)
  http.HandleFunc("/ws", wsHandler)
  http.ListenAndServe(addrPort, nil)
}