Mybatis mapper動態代理的原理解析
更新時間：2019年08月21日 08:29:32 作者：全me村的希望
這篇文章主要介紹了Mybatis mapper動態代理的原理解析,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下
前言
在開始動態代理的原理講解以前，我們先看一下集成mybatis以后dao層不使用動態代理以及使用動態代理的兩種實現方式，通過對比我們自己實現dao層接口以及mybatis動態代理可以更加直觀的展現出mybatis動態代理替我們所做的工作，有利于我們理解動態代理的過程，講解完以后我們?cè)龠M(jìn)行動態代理的原理解析，此講解基于mybatis的環境已經搭建完成，并且已經實現了基本的用戶類編寫以及用戶類的Dao接口的聲明，下面是Dao層的接口代碼
public interface UserDao {
/*
查詢所有用戶信息
*/
List<User> findAll();
/**
* 保存用戶
* @param user
*/
void save(User user);
/**
* 更新用戶
* @return
*/
void update(User user);
/**
* 刪除用戶
*/
void delete(Integer userId);
/**
* 查找一個用戶
* @param userId
* @return
*/
User findOne(Integer userId);
/**
* 根據名字模糊查詢
* @param name
* @return
*/
List<User> findByName(String name);
/**
* 根據組合對象進行模糊查詢
* @param vo
* @return
*/
List<User> findByQueryVo(QueryVo vo);
}
一、Mybatis dao層兩種實現方式的對比
1.dao層不使用動態代理
dao層不使用動態代理的話，就需要我們自己實現dao層的接口，為了簡便起見，我只是實現了Dao接口中的findAll方法，以此方法為例子來展現我們自己實現Dao的方式的情況，讓我們來看代碼：
public class UserDaoImpl implements UserDao{
private SqlSessionFactory factory;
public UserDaoImpl(SqlSessionFactory factory){
this.factory = factory;
}
public List<User> findAll() {
//1.獲取sqlSession對象
SqlSession sqlSession = factory.openSession();
//2.調用selectList方法
List<User> list = sqlSession.selectList("com.example.dao.UserDao.findAll");
//3.關閉流
sqlSession.close();
return list;
}
public void save(User user) {
}
public void update(User user) {
}
public void delete(Integer userId) {
}
public User findOne(Integer userId) {
return null;
}
public List<User> findByName(String name) {
return null;
}
public List<User> findByQueryVo(QueryVo vo) {
return null;
}
這里的關鍵代碼 List<User> list = sqlSession.selectList("com.example.dao.UserDao.findAll")，需要我們自己手動調用SqlSession里面的方法，基于動態代理的方式最后的目標也是成功的調用到這里。
注意：如果是添加，更新或者刪除操作的話需要在方法中增加事務的提交。
2.dao層使用Mybatis的動態代理
使用動態代理的話Dao層的接口聲明完成以后只需要在使用的時候通過SqlSession對象的getMapper方法獲取對應Dao接口的代理對象，關鍵代碼如下：
//3.獲取SqlSession對象 SqlSession session = factory.openSession(); //4.獲取dao的代理對象 UserDao mapper = session.getMapper(UserDao.class); //5.執行查詢所有的方法 List<User> list = mapper.findAll();
獲取到dao層的代理對象以后通過代理對象調用查詢方法就可以實現查詢所有用戶列表的功能。
二、Mybatis動態代理實現方式的原理解析
動態代理中最重要的類：SqlSession、MapperProxy、MapperMethod，下面開始從入口方法到調用結束的過程分析。
1.調用方法的開始:
//4.獲取dao的代理對象
UserDao mapper = session.getMapper(UserDao.class); 因?yàn)镾qlSesseion為接口，所以我們通過Debug方式發現這里使用的實現類為DefaultSqlSession。
2.找到DeaultSqlSession中的getMapper方法，發現這里沒有做其他的動作，只是將工作繼續拋到了Configuration類中，Configuration為類不是接口，可以直接進入該類的getMapper方法中
@Override
public <T> T getMapper(Class<T> type) {
return configuration.<T>getMapper(type, this);
}
3. 找到Configuration類的getMapper方法，這里也是將工作繼續交到MapperRegistry的getMapper的方法中，所以我們繼續向下進行。
public <T> T getMapper(Class<T> type, SqlSession sqlSession) {
return mapperRegistry.getMapper(type, sqlSession);
}
4. 找到MapperRegistry的getMapper的方法,看到這里發現和以前不一樣了，通過MapperProxyFactory的命名方式我們知道這里將通過這個工廠生成我們所關注的MapperProxy的代理類，然后我們通過mapperProxyFactory.newInstance(sqlSession);進入MapperProxyFactory的newInstance方法中
public <T> T getMapper(Class<T> type, SqlSession sqlSession) {
final MapperProxyFactory<T> mapperProxyFactory = (MapperProxyFactory<T>) knownMappers.get(type);
if (mapperProxyFactory == null) {
throw new BindingException("Type " + type + " is not known to the MapperRegistry.");
}
try {
return mapperProxyFactory.newInstance(sqlSession);
} catch (Exception e) {
throw new BindingException("Error getting mapper instance. Cause: " + e, e);
}
}
5. 找到MapperProxyFactory的newIntance方法，通過參數類型SqlSession可以得知，上面的調用先進入第二個newInstance方法中并創建我們所需要重點關注的MapperProxy對象，第二個方法中再調用第一個newInstance方法并將MapperProxy對象傳入進去，根據該對象創建代理類并返回。這里已經得到需要的代理類了，但是我們的代理類所做的工作還得繼續向下看MapperProxy類。
protected T newInstance(MapperProxy<T> mapperProxy) {
return (T) Proxy.newProxyInstance(mapperInterface.getClassLoader(), new Class[] { mapperInterface }, mapperProxy);
}
public T newInstance(SqlSession sqlSession) {
final MapperProxy<T> mapperProxy = new MapperProxy<T>(sqlSession, mapperInterface, methodCache);
return newInstance(mapperProxy);
}
6. 找到MapperProxy類，發現其確實實現了JDK動態代理必須實現的接口InvocationHandler，所以我們重點關注invoke()方法，這里看到在invoke方法里先獲取MapperMethod類，然后調用mapperMethod.execute()，所以我們繼續查看MapperMethod類的execute方法。
public class MapperProxy<T> implements InvocationHandler, Serializable {
private static final long serialVersionUID = -6424540398559729838L;
private final SqlSession sqlSession;
private final Class<T> mapperInterface;
private final Map<Method, MapperMethod> methodCache;
public MapperProxy(SqlSession sqlSession, Class<T> mapperInterface, Map<Method, MapperMethod> methodCache) {
this.sqlSession = sqlSession;
this.mapperInterface = mapperInterface;
this.methodCache = methodCache;
}
@Override
public Object invoke(Object proxy, Method method, Object[] args) throws Throwable {
try {
if (Object.class.equals(method.getDeclaringClass())) {
return method.invoke(this, args);
} else if (isDefaultMethod(method)) {
return invokeDefaultMethod(proxy, method, args);
}
} catch (Throwable t) {
throw ExceptionUtil.unwrapThrowable(t);
}
final MapperMethod mapperMethod = cachedMapperMethod(method);
return mapperMethod.execute(sqlSession, args);
}
private MapperMethod cachedMapperMethod(Method method) {
MapperMethod mapperMethod = methodCache.get(method);
if (mapperMethod == null) {
mapperMethod = new MapperMethod(mapperInterface, method, sqlSession.getConfiguration());
methodCache.put(method, mapperMethod);
}
return mapperMethod;
}
@UsesJava7
private Object invokeDefaultMethod(Object proxy, Method method, Object[] args)
throws Throwable {
final Constructor<MethodHandles.Lookup> constructor = MethodHandles.Lookup.class
.getDeclaredConstructor(Class.class, int.class);
if (!constructor.isAccessible()) {
constructor.setAccessible(true);
}
final Class<?> declaringClass = method.getDeclaringClass();
return constructor
.newInstance(declaringClass,
MethodHandles.Lookup.PRIVATE | MethodHandles.Lookup.PROTECTED
| MethodHandles.Lookup.PACKAGE | MethodHandles.Lookup.PUBLIC)
.unreflectSpecial(method, declaringClass).bindTo(proxy).invokeWithArguments(args);
}
/**
* Backport of java.lang.reflect.Method#isDefault()
*/
private boolean isDefaultMethod(Method method) {
return ((method.getModifiers()
& (Modifier.ABSTRACT | Modifier.PUBLIC | Modifier.STATIC)) == Modifier.PUBLIC)
&& method.getDeclaringClass().isInterface();
}
}
7. 找到類MapperMethod類的execute方法，發現execute中通過調用本類中的其他方法獲取并封裝返回結果，我們來看一下MapperMethod整個類。
public Object execute(SqlSession sqlSession, Object[] args) {
Object result;
switch (command.getType()) {
case INSERT: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.insert(command.getName(), param));
break;
}
case UPDATE: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.update(command.getName(), param));
break;
}
case DELETE: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.delete(command.getName(), param));
break;
}
case SELECT:
if (method.returnsVoid() && method.hasResultHandler()) {
executeWithResultHandler(sqlSession, args);
result = null;
} else if (method.returnsMany()) {
result = executeForMany(sqlSession, args);
} else if (method.returnsMap()) {
result = executeForMap(sqlSession, args);
} else if (method.returnsCursor()) {
result = executeForCursor(sqlSession, args);
} else {
Object param = method.convertArgsToSqlCommandParam(args);
result = sqlSession.selectOne(command.getName(), param);
}
break;
case FLUSH:
result = sqlSession.flushStatements();
break;
default:
throw new BindingException("Unknown execution method for: " + command.getName());
}
if (result == null && method.getReturnType().isPrimitive() && !method.returnsVoid()) {
throw new BindingException("Mapper method '" + command.getName()
+ " attempted to return null from a method with a primitive return type (" + method.getReturnType() + ").");
}
return result;
}
8. MapperMethod類是整個代理機制的核心類，對SqlSession中的操作進行了封裝使用。
該類里有兩個內部類SqlCommand和MethodSignature。 SqlCommand用來封裝CRUD操作，也就是我們?cè)趚ml中配置的操作的節點。每個節點都會生成一個MappedStatement類。
MethodSignature用來封裝方法的參數以及返回類型，在execute的方法中我們發現在這里又回到了SqlSession中的接口調用，和我們自己實現UerDao接口的方式中直接用SqlSession對象調用DefaultSqlSession的實現類的方法是一樣的，經過一大圈的代理又回到了原地，這就是整個動態代理的實現過程了。
public class MapperMethod {
private final SqlCommand command;
private final MethodSignature method;
public MapperMethod(Class<?> mapperInterface, Method method, Configuration config) {
this.command = new SqlCommand(config, mapperInterface, method);
this.method = new MethodSignature(config, mapperInterface, method);
}
public Object execute(SqlSession sqlSession, Object[] args) {
Object result;
switch (command.getType()) {
case INSERT: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.insert(command.getName(), param));
break;
}
case UPDATE: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.update(command.getName(), param));
break;
}
case DELETE: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.delete(command.getName(), param));
break;
}
case SELECT:
if (method.returnsVoid() && method.hasResultHandler()) {
executeWithResultHandler(sqlSession, args);
result = null;
} else if (method.returnsMany()) {
result = executeForMany(sqlSession, args);
} else if (method.returnsMap()) {
result = executeForMap(sqlSession, args);
} else if (method.returnsCursor()) {
result = executeForCursor(sqlSession, args);
} else {
Object param = method.convertArgsToSqlCommandParam(args);
result = sqlSession.selectOne(command.getName(), param);
}
break;
case FLUSH:
result = sqlSession.flushStatements();
break;
default:
throw new BindingException("Unknown execution method for: " + command.getName());
}
if (result == null && method.getReturnType().isPrimitive() && !method.returnsVoid()) {
throw new BindingException("Mapper method '" + command.getName()
+ " attempted to return null from a method with a primitive return type (" + method.getReturnType() + ").");
}
return result;
}
private Object rowCountResult(int rowCount) {
final Object result;
if (method.returnsVoid()) {
result = null;
} else if (Integer.class.equals(method.getReturnType()) || Integer.TYPE.equals(method.getReturnType())) {
result = rowCount;
} else if (Long.class.equals(method.getReturnType()) || Long.TYPE.equals(method.getReturnType())) {
result = (long)rowCount;
} else if (Boolean.class.equals(method.getReturnType()) || Boolean.TYPE.equals(method.getReturnType())) {
result = rowCount > 0;
} else {
throw new BindingException("Mapper method '" + command.getName() + "' has an unsupported return type: " + method.getReturnType());
}
return result;
}
private void executeWithResultHandler(SqlSession sqlSession, Object[] args) {
MappedStatement ms = sqlSession.getConfiguration().getMappedStatement(command.getName());
if (void.class.equals(ms.getResultMaps().get(0).getType())) {
throw new BindingException("method " + command.getName()
+ " needs either a @ResultMap annotation, a @ResultType annotation,"
+ " or a resultType attribute in XML so a ResultHandler can be used as a parameter.");
}
Object param = method.convertArgsToSqlCommandParam(args);
if (method.hasRowBounds()) {
RowBounds rowBounds = method.extractRowBounds(args);
sqlSession.select(command.getName(), param, rowBounds, method.extractResultHandler(args));
} else {
sqlSession.select(command.getName(), param, method.extractResultHandler(args));
}
}
private <E> Object executeForMany(SqlSession sqlSession, Object[] args) {
List<E> result;
Object param = method.convertArgsToSqlCommandParam(args);
if (method.hasRowBounds()) {
RowBounds rowBounds = method.extractRowBounds(args);
result = sqlSession.<E>selectList(command.getName(), param, rowBounds);
} else {
result = sqlSession.<E>selectList(command.getName(), param);
}
// issue #510 Collections & arrays support
if (!method.getReturnType().isAssignableFrom(result.getClass())) {
if (method.getReturnType().isArray()) {
return convertToArray(result);
} else {
return convertToDeclaredCollection(sqlSession.getConfiguration(), result);
}
}
return result;
}
private <T> Cursor<T> executeForCursor(SqlSession sqlSession, Object[] args) {
Cursor<T> result;
Object param = method.convertArgsToSqlCommandParam(args);
if (method.hasRowBounds()) {
RowBounds rowBounds = method.extractRowBounds(args);
result = sqlSession.<T>selectCursor(command.getName(), param, rowBounds);
} else {
result = sqlSession.<T>selectCursor(command.getName(), param);
}
return result;
}
private <E> Object convertToDeclaredCollection(Configuration config, List<E> list) {
Object collection = config.getObjectFactory().create(method.getReturnType());
MetaObject metaObject = config.newMetaObject(collection);
metaObject.addAll(list);
return collection;
}
@SuppressWarnings("unchecked")
private <E> Object convertToArray(List<E> list) {
Class<?> arrayComponentType = method.getReturnType().getComponentType();
Object array = Array.newInstance(arrayComponentType, list.size());
if (arrayComponentType.isPrimitive()) {
for (int i = 0; i < list.size(); i++) {
Array.set(array, i, list.get(i));
}
return array;
} else {
return list.toArray((E[])array);
}
}
private <K, V> Map<K, V> executeForMap(SqlSession sqlSession, Object[] args) {
Map<K, V> result;
Object param = method.convertArgsToSqlCommandParam(args);
if (method.hasRowBounds()) {
RowBounds rowBounds = method.extractRowBounds(args);
result = sqlSession.<K, V>selectMap(command.getName(), param, method.getMapKey(), rowBounds);
} else {
result = sqlSession.<K, V>selectMap(command.getName(), param, method.getMapKey());
}
return result;
}
public static class ParamMap<V> extends HashMap<String, V> {
private static final long serialVersionUID = -2212268410512043556L;
@Override
public V get(Object key) {
if (!super.containsKey(key)) {
throw new BindingException("Parameter '" + key + "' not found. Available parameters are " + keySet());
}
return super.get(key);
}
}
public static class SqlCommand {
private final String name;
private final SqlCommandType type;
public SqlCommand(Configuration configuration, Class<?> mapperInterface, Method method) {
final String methodName = method.getName();
final Class<?> declaringClass = method.getDeclaringClass();
MappedStatement ms = resolveMappedStatement(mapperInterface, methodName, declaringClass,
configuration);
if (ms == null) {
if (method.getAnnotation(Flush.class) != null) {
name = null;
type = SqlCommandType.FLUSH;
} else {
throw new BindingException("Invalid bound statement (not found): "
+ mapperInterface.getName() + "." + methodName);
}
} else {
name = ms.getId();
type = ms.getSqlCommandType();
if (type == SqlCommandType.UNKNOWN) {
throw new BindingException("Unknown execution method for: " + name);
}
}
}
public String getName() {
return name;
}
public SqlCommandType getType() {
return type;
}
private MappedStatement resolveMappedStatement(Class<?> mapperInterface, String methodName,
Class<?> declaringClass, Configuration configuration) {
String statementId = mapperInterface.getName() + "." + methodName;
if (configuration.hasStatement(statementId)) {
return configuration.getMappedStatement(statementId);
} else if (mapperInterface.equals(declaringClass)) {
return null;
}
for (Class<?> superInterface : mapperInterface.getInterfaces()) {
if (declaringClass.isAssignableFrom(superInterface)) {
MappedStatement ms = resolveMappedStatement(superInterface, methodName,
declaringClass, configuration);
if (ms != null) {
return ms;
}
}
}
return null;
}
}
public static class MethodSignature {
private final boolean returnsMany;
private final boolean returnsMap;
private final boolean returnsVoid;
private final boolean returnsCursor;
private final Class<?> returnType;
private final String mapKey;
private final Integer resultHandlerIndex;
private final Integer rowBoundsIndex;
private final ParamNameResolver paramNameResolver;
public MethodSignature(Configuration configuration, Class<?> mapperInterface, Method method) {
Type resolvedReturnType = TypeParameterResolver.resolveReturnType(method, mapperInterface);
if (resolvedReturnType instanceof Class<?>) {
this.returnType = (Class<?>) resolvedReturnType;
} else if (resolvedReturnType instanceof ParameterizedType) {
this.returnType = (Class<?>) ((ParameterizedType) resolvedReturnType).getRawType();
} else {
this.returnType = method.getReturnType();
}
this.returnsVoid = void.class.equals(this.returnType);
this.returnsMany = (configuration.getObjectFactory().isCollection(this.returnType) || this.returnType.isArray());
this.returnsCursor = Cursor.class.equals(this.returnType);
this.mapKey = getMapKey(method);
this.returnsMap = (this.mapKey != null);
this.rowBoundsIndex = getUniqueParamIndex(method, RowBounds.class);
this.resultHandlerIndex = getUniqueParamIndex(method, ResultHandler.class);
this.paramNameResolver = new ParamNameResolver(configuration, method);
}
public Object convertArgsToSqlCommandParam(Object[] args) {
return paramNameResolver.getNamedParams(args);
}
public boolean hasRowBounds() {
return rowBoundsIndex != null;
}
public RowBounds extractRowBounds(Object[] args) {
return hasRowBounds() ? (RowBounds) args[rowBoundsIndex] : null;
}
public boolean hasResultHandler() {
return resultHandlerIndex != null;
}
public ResultHandler extractResultHandler(Object[] args) {
return hasResultHandler() ? (ResultHandler) args[resultHandlerIndex] : null;
}
public String getMapKey() {
return mapKey;
}
public Class<?> getReturnType() {
return returnType;
}
public boolean returnsMany() {
return returnsMany;
}
public boolean returnsMap() {
return returnsMap;
}
public boolean returnsVoid() {
return returnsVoid;
}
public boolean returnsCursor() {
return returnsCursor;
}
private Integer getUniqueParamIndex(Method method, Class<?> paramType) {
Integer index = null;
final Class<?>[] argTypes = method.getParameterTypes();
for (int i = 0; i < argTypes.length; i++) {
if (paramType.isAssignableFrom(argTypes[i])) {
if (index == null) {
index = i;
} else {
throw new BindingException(method.getName() + " cannot have multiple " + paramType.getSimpleName() + " parameters");
}
}
}
return index;
}
private String getMapKey(Method method) {
String mapKey = null;
if (Map.class.isAssignableFrom(method.getReturnType())) {
final MapKey mapKeyAnnotation = method.getAnnotation(MapKey.class);
if (mapKeyAnnotation != null) {
mapKey = mapKeyAnnotation.value();
}
}
return mapKey;
}
}
以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
您可能感興趣的文章:
- MyBatis加載映射文件和動態代理的實現
- Mybatis基于MapperScan注解的動態代理加載機制詳解
- Java之MyBatis的Dao方式以及Dao動態代理詳解
- 解析Mybatis Porxy動態代理和sql解析替換問題
- 超全MyBatis動態代理詳解(絕對干貨)
- Mybatis mapper接口動態代理開發步驟解析
- Mybatis之Mapper動態代理實例解析
- 詳解MyBatis開發Dao層的兩種方式（Mapper動態代理方式）
- Mybatis實現Mapper動態代理方式詳解
- 詳解MyBatis動態代理機制
Linux下MySQL數據庫的主從同步復制配置
這篇文章主要介紹了Linux下MySQL數據庫的主從同步配置，
2017-11-11 
詳解MySQL存儲過程參數有三種類型(in、out、inout)
MySQL 存儲過程參數有三種類型：in、out、inout。它們各有什么作用和特點呢
2012-07-07 
MySql 5.6.14 Win32位免安裝解壓縮版配置教程
本文給大家介紹mysql 5.6.14 win32 位免安裝解壓縮版配置方法，本文分步驟給大家介紹的非常詳細，具有一定的參考借鑒價值，對mysql5.6.14 免安裝解壓縮版配置方法感興趣的朋友一起看看吧
2016-11-11 
MySQL聯合索引與最左匹配原則的實現
最左匹配原則在我們MySQL開發過程中和面試過程中經常遇到,為了加深印象和理解,我在這里把MySQL的最左匹配原則詳細的講解一下,感興趣的可以了解一下
2023-12-12 
計算機二級考試MySQL知識點 mysql alter命令
這篇文章主要為大家詳細介紹了計算機二級考試MySQL知識點，詳細介紹了mysql中alter命令的使用方法，具有一定的參考價值，感興趣的小伙伴們可以參考一下
2017-08-08 
Mysql根據某層部門ID查詢所有下級多層子部門的示例
這篇文章主要介紹了Mysql根據某層部門ID查詢所有下級多層子部門的示例，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
2020-12-12 
mysql建庫時提示Specified key was too long max key length is 1000
本文將詳細提供mysql建庫時提示Specified key was too long max key length is 1000 bytes的問題的解決方法，有需求的朋友可以參考
2012-11-11 
今天小編就為大家分享一篇關于Ubuntu上mysql的安裝及使用(通用版)，小編覺得內容挺不錯的，現在分享給大家，具有很好的參考價值，需要的朋友一起跟隨小編來看看吧
2019-03-03 
Mysql中InnoDB與MyISAM索引差異詳解(最新整理)
InnoDB和MyISAM在索引實現和特性上有差異,包括聚集索引、非聚集索引、事務支持、并發控制、覆蓋索引、主鍵約束、外鍵支持和物理存儲結構等方面,InnoDB更適合事務型應用,而MyISAM適合只讀或讀多寫少的場景,本文介紹Mysql中InnoDB與MyISAM索引差異,感興趣的朋友一起看看吧
2025-03-03