快捷導航

python實現Virginia無密鑰解密

更新時間：2019年03月20日 09:25:27 作者：Aslani

這篇文章主要為大家詳細介紹了python實現Virginia無密鑰解密，具有一定的參考價值，感興趣的小伙伴們可以參考一下

本文實例為大家分享了Virginia無密鑰解密的具體代碼，供大家參考，具體內容如下

加密

virginia加密是一種多表替換加密方法，通過這種方法，可以有效的解決單表替換中無法應對的字母頻度攻擊。這種加密方法最重要的就是選取合適的密鑰，一旦密鑰被公開，保密性也就無從談起。結合virginia加密原理，給出使用python實現的代碼

plainText = "whenigotthethemeithoughtofgooglesartificialintelligencealphagothisprogramoverthebestofhumanplayeriwanttoaskwhenscienceandtechnologycontinuetodevelopwehumanbeingswillbewhatpositionweshouldrealizethatthedevelopmentofscienceandtechnologyisirreversibleanditconstituteaprimaryprductiveforcebutmanmustkeeppacewiththetimestoenhancetheablitytocontrol" # 密文
alphabet = "abcdefghijklmnopqrstuvwxyz" # 26個字母
cipherText = "";
key = "helloworld" # 密鑰
keyLen = len(key)
plainTextLen = len(plainText)
j = 0
for i in range(0,plainTextLen):
 j = i%keyLen
 keyNum = alphabet.index(key[j])
 plainNum = alphabet.index(plainText[i])
 plainTemp = alphabet[(keyNum*plainNum)%26] # 密鑰對明文作用
 cipherText += plainTemp
print(cipherText)

解密

重點談?wù)劷饷懿糠?。這里的解密主要分為獲取密鑰長度，根據密鑰長度獲取密鑰，根據密鑰獲取明文三個部分。

獲取密鑰長度

使用暴力破解密鑰長度的方法，循環遍歷可能的密鑰長度。每次循環中，記錄在這種密鑰長度下重復相隔密鑰長度密文的次數，從理論上來講，次數最多的那個密鑰長度，最有可能正確。當密文長度足夠長時，正確的可能性很高。給出獲取密鑰長度的python函數代碼：

def getKeyLen(cipherText): # 獲取密鑰長度
 keylength = 1
 maxCount = 0
 for step in range(3,18): # 循環密鑰長度
  count = 0
  for i in range(step,len(cipherText)-step):
   if cipherText[i] == cipherText[i+step]: 
     count += 1
  if count>maxCount: # 每次保存最大次數的密鑰長度
   maxCount = count 
   keylength = step
 return keylength # 返回密鑰長度

獲取密鑰

當已經獲取密鑰長度之后，我們可以通過分組將相同密鑰作用下的密文進行分組，在每一組中，都是一個簡單的單表替換加密。在這種情況下，我們通過重合指數法破解密鑰，給出獲取密鑰部分的python函數代碼：

def getKey(text,length): # 獲取密鑰
 key = [] # 定義空白列表用來存密鑰
 alphaRate =[0.08167,0.01492,0.02782,0.04253,0.12705,0.02228,0.02015,0.06094,0.06996,0.00153,0.00772,0.04025,0.02406,0.06749,0.07507,0.01929,0.0009,0.05987,0.06327,0.09056,0.02758,0.00978,0.02360,0.0015,0.01974,0.00074]
 matrix =textToList(text,length)
 for i in range(length):
  w = [row[i] for row in matrix] #獲取每組密文
  li = countList(w) 
  powLi = [] #算乘積
  for j in range(26):
   Sum = 0.0
   for k in range(26):
    Sum += alphaRate[k]*li[k]
   powLi.append(Sum)
   li = li[1:]+li[:1]#循環移位
  Abs = 100
  ch = ''
  for j in range(len(powLi)):
    if abs(powLi[j] -0.065546)<Abs: # 找出最接近英文字母重合指數的項
     Abs = abs(powLi[j] -0.065546) # 保存最接近的距離，作為下次比較的基準
     ch = chr(j+97)
  key.append(ch)
 return key

破解明文

在已知密鑰和明文的基礎上，我們很容易就可以得到明文，給出python代碼：

def virginiaCrack(cipherText): # 解密函數
 length = getKeyLen(cipherText) #得到密鑰長度
 key = getKey(cipherText,length) #找到密鑰
 keyStr = ''
 for k in key:
  keyStr+=k
 print('the Key is:',keyStr)
 plainText = ''
 index = 0
 for ch in cipherText:
  c = chr((ord(ch)-ord(key[index%length]))%26+97)
  plainText += c
  index+=1
 return plainText # 返回明文

代碼

這是解密部分的全部代碼，注意需要自己添加密文文件的位置

def virginiaCrack(cipherText): # 解密函數
 length = getKeyLen(cipherText) #得到密鑰長度
 key = getKey(cipherText,length) #找到密鑰
 keyStr = ''
 for k in key:
  keyStr+=k
 print('the key:',keyStr)
 plainText = ''
 index = 0
 for ch in cipherText:
  c = chr((ord(ch)-ord(key[index%length]))%26+97)
  plainText += c
  index+=1
 return plainText
def openfile(fileName): # 讀文件
 file = open(fileName,'r')
 text = file.read()
 file.close();
 text = text.replace('\n','')
 return text

def getKeyLen(cipherText): # 獲取密鑰長度
 keylength = 1
 maxCount = 0
 for step in range(3,18): # 循環密鑰長度
  count = 0
  for i in range(step,len(cipherText)-step):
   if cipherText[i] == cipherText[i+step]:
     count += 1
  if count>maxCount:
   maxCount = count
   keylength = step
 return keylength

def getKey(text,length): # 獲取密鑰
 key = [] # 定義空白列表用來存密鑰
 alphaRate =[0.08167,0.01492,0.02782,0.04253,0.12705,0.02228,0.02015,0.06094,0.06996,0.00153,0.00772,0.04025,0.02406,0.06749,0.07507,0.01929,0.0009,0.05987,0.06327,0.09056,0.02758,0.00978,0.02360,0.0015,0.01974,0.00074]
 matrix =textToList(text,length)
 for i in range(length):
  w = [row[i] for row in matrix] #獲取每組密文
  li = countList(w) 
  powLi = [] #算乘積
  for j in range(26):
   Sum = 0.0
   for k in range(26):
    Sum += alphaRate[k]*li[k]
   powLi.append(Sum)
   li = li[1:]+li[:1]#循環移位
  Abs = 100
  ch = ''
  for j in range(len(powLi)):
    if abs(powLi[j] -0.065546)<Abs: # 找出最接近英文字母重合指數的項
     Abs = abs(powLi[j] -0.065546) # 保存最接近的距離，作為下次比較的基準
     ch = chr(j+97)
  key.append(ch)
 return key    

def countList(lis): # 統計字母頻度
 li = []
 alphabet = [chr(i) for i in range(97,123)]
 for c in alphabet:
  count = 0
  for ch in lis:
   if ch == c:
    count+=1
  li.append(count/len(lis))
 return li

def textToList(text,length): # 根據密鑰長度將密文分組
 textMatrix = []
 row = []
 index = 0
 for ch in text:
  row.append(ch)
  index += 1
  if index % length ==0:
   textMatrix.append(row)
   row = []
 return textMatrix

if __name__ == '__main__':
 cipherText = openfile(r'') # 這里要根據文檔目錄的不同而改變
 plainText= virginiaCrack(cipherText)
 print('the plainText:\n',plainText)

以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: