我們做登錄的時候經常會使用到，驗證手機號是否正確、向手機發送驗證碼倒計時60s的問題，我們改如何解決呢？讓我們一起來探討一下吧。如下圖：

首先，我們先說說判斷手機號碼是否正確的問題吧，我的想法是給字符串添加一個分類，然后寫上這樣的代碼：
+ (BOOL)valiMobile:(NSString *)mobile{
        if (mobile.length != 11){
            //判斷手機號碼是否為11位
            return NO;
            }else{
                //使用正則表達式的方法來判斷手機號
/**
* 移動號段正則表達式
  */
                NSString *CM_NUM = @"^((13[4-9])|(147)|(15[0-2,7-9])|(178)|(18[2-4,7-8]))\\d{8}|(1705)\\d{7}$";
/**
* 聯通號段正則表達式
*/
                 NSString *CU_NUM = @"^((13[0-2])|(145)|(15[5-6])|(176)|(18[5,6]))\\d{8}|(1709)\\d{7}$";
/**
* 電信號段正則表達式
*/
                NSString *CT_NUM = @"^((133)|(153)|(177)|(18[0,1,9]))\\d{8}$";
//初始化NSPredicate對象
                NSPredicate *pred1 = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", CM_NUM];
//與具體對象進行篩選判斷, 返回為BOOL值
                BOOL isMatch1 = [pred1 evaluateWithObject:mobile];
                NSPredicate *pred2 = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", CU_NUM];
                BOOL isMatch2 = [pred2 evaluateWithObject:mobile];
                NSPredicate *pred3 = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", CT_NUM];
            BOOL isMatch3 = [pred3 evaluateWithObject:mobile];
                if (isMatch1 || isMatch2 || isMatch3) {
                    return YES;
                    }else{
                return NO;
            }
        }
}
如果大家對于NSPredicate的用法有些疑問的話可以看看這篇文章：http://www.jianshu.com/p/d4098bc9488d下面再來說一說驗證碼倒計時的問題,1、我給button創建了一個分類2、設定button上的文字，并記錄倒計時的總時長，然后開一個定時器，并且關閉button的點擊事件3、定時器中將總時間縮減，并且設置button的文字，然后做一個判斷，判斷時間是否歸為0，如果為0 就釋放定時器，然后設置button上的文字，然后打開用戶交互。代碼如下：.h文件中
#import@interface UIButton (BtnTime)
/**
按鈕倒計時的問題
@param countDownTime 倒計時的時間(分鐘)
*/
- (void)buttonWithTime:(CGFloat)countDownTime;
@end
.m文件中
#import "UIButton+BtnTime.h"
/** 倒計時的顯示時間 */
static NSInteger secondsCountDown;
/** 記錄總共的時間 */
static NSInteger allTime;
@implementation UIButton (BtnTime)
- (void)buttonWithTime:(CGFloat)countDownTime {
self.userInteractionEnabled = NO;
secondsCountDown = 60 * countDownTime;
allTime = 60 * countDownTime;
[self setTitle:[NSString stringWithFormat:@"%lds后重新獲取",secondsCountDown] forState:UIControlStateNormal];
[NSTimer scheduledTimerWithTimeInterval:1 target:self selector:@selector(timeFireMethod:) userInfo:nil repeats:YES];
}
-(void)timeFireMethod:(NSTimer *)countDownTimer{
//倒計時-1
secondsCountDown--;
//修改倒計時標簽現實內容
[self setTitle:[NSString stringWithFormat:@"%lds后重新獲取",secondsCountDown] forState:UIControlStateNormal];
//當?shù)褂?jì)時到0時，做需要的操作，比如驗證碼過期不能提交
if(secondsCountDown == 0){
[countDownTimer invalidate];
[self setTitle:@"重新獲取" forState:UIControlStateNormal];
secondsCountDown = allTime;
self.userInteractionEnabled = YES;
}
}
@end

代碼已經上傳到github上去了，地址：https://github.com/zhangyqyx/Countdown

作者：誰遇而安
鏈接：https://www.jianshu.com/p/d9fbfd8bff75
來源：簡書
簡書著作權歸作者所有，任何形式的轉載都請聯系作者獲得授權并注明出處。

最新評論