Spring Validation方法實現原理分析

更新時間：2018年07月10日 08:39:43 作者：68號小喇叭

這篇文章主要介紹了Spring Validation實現原理分析，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧

最近要做動態數據的提交處理，即需要分析提交數據字段定義信息后才能明確對應的具體字段類型，進而做數據類型轉換和字段有效性校驗，然后做業務處理后提交數據庫，自己開發一套校驗邏輯的話周期太長，因此分析了Spring Validation的實現原理，復用了其底層花樣繁多的Validator，在此將分析Spring Validation原理的過程記錄下，不深入細節

如何使用Spring Validation

Spring Bean初始化時校驗Bean是否符合JSR-303規范

1、手動添加BeanValidationPostProcessor Bean

2、在model類中定義校驗規則，如@Max、@Min、@NotEmpty

3、聲明Bean，綜合代碼如下：

@Bean
public BeanPostProcessor beanValidationPostProcessor() {
  return new BeanValidationPostProcessor();
}

@Bean
public UserModel getUserModel() {
  UserModel userModel = new UserModel();
  userModel.setUsername(null);
  userModel.setPassword("123");
  return userModel;
}

@Data
class UserModel {
  @NotNull(message = "username can not be null")
  @Pattern(regexp = "[a-zA-Z0-9_]{5,10}", message = "username is illegal")
  private String username;
  @Size(min = 5, max = 10, message = "password's length is illegal")
  private String password;
}

4、BeanValidationPostProcessor Bean內部有個boolean類型的屬性afterInitialization，默認是false，如果是false，在postProcessBeforeInitialization過程中對bean進行驗證，否則在postProcessAfterInitialization過程對bean進行驗證

5、此種校驗使用了spring的BeanPostProcessor邏輯

6、校驗底層調用了doValidate方法，進一步調用validator.validate，默認validator為HibernateValidator，validation-api包為JAVA規范，Spring默認的規范實現為hibernate-validator包，此hibernate非ORM框架Hibernate

protected void doValidate(Object bean) {
 Assert.state(this.validator != null, "No Validator set");
 Set<ConstraintViolation<Object>> result = this.validator.validate(bean);

7、HibernateValidator默認調用ValidatorFactoryImpl來生成validator，后面展開將ValidatorFactoryImpl

支持方法級別的JSR-303規范

1、手動添加MethodValidationPostProcessor Bean

2、類上加上@Validated注解（也支持自定義注解，創建MethodValidationPostProcessor Bean時傳入）

3、在方法的參數中加上驗證注解，比如@Max、@Min、@NotEmpty、@NotNull等，如

@Component
@Validated
public class BeanForMethodValidation {
  public void validate(@NotEmpty String name, @Min(10) int age) {
    System.out.println("validate, name: " + name + ", age: " + age);
  }
}

4、MethodValidationPostProcessor內部使用aop完成對方法的調用

public void afterPropertiesSet() {
  Pointcut pointcut = new `AnnotationMatchingPointcut`(this.validatedAnnotationType, true);
  this.advisor = new `DefaultPointcutAdvisor`(pointcut, createMethodValidationAdvice(this.validator));
}
protected Advice createMethodValidationAdvice(@Nullable Validator validator) {
 return (validator != null ? new `MethodValidationInterceptor`(validator) : new MethodValidationInterceptor());
}

5、底層同樣默認調用ValidatorFactoryImpl來生成validator，由validator完成校驗

直接編碼調用校驗邏輯，如

public class Person {
@NotNull(message = "性別不能為空")
private Gender gender;
@Min(10)
private Integer age;
...
}
ValidatorFactory validatorFactory = Validation.buildDefaultValidatorFactory();
Validator validator = validatorFactory.getValidator();
Person person = new Person();
person.setGender(Gender.Man);
validator.validate(person);

同上，默認調用ValidatorFactoryImpl來生成validator，由validator完成具體校驗

在Spring controller方法參數中使用valid或validated注解標注待校驗參數

1、先熟悉下Spring的請求調用流程

2、可以看到在各種resolver處理請求參數的過程中做了參數校驗

3、底層統一調用了DataBinder的validate方法

4、DataBinder的作用：Binder that allows for setting property values onto a target object, including support for validation and binding result analysis，也就是binder處理了request提交的字符串形式的參數，將其轉換成服務端真正需要的類型，binder提供了對validation的支持，可以存放校驗結果

5、DataBinder的validator默認在ConfigurableWebBindingInitializer中初始化，默認使用OptionalValidatorFactoryBean，該Bean繼承了LocalValidatorFactoryBean，LocalValidatorFactoryBean組合了ValidatorFactory、自定義校驗屬性等各種校驗會用到的信息，默認使用ValidatorFactoryImpl來獲取validator

至此，所有的線索都指向了ValidatorFactoryImpl，下面分析下該類

public Validator `getValidator`() {
 return `createValidator`(
 constraintValidatorManager.getDefaultConstraintValidatorFactory(),
 valueExtractorManager,
 validatorFactoryScopedContext,
 methodValidationConfiguration
 );
}
Validator `createValidator`(ConstraintValidatorFactory constraintValidatorFactory,
 ValueExtractorManager valueExtractorManager,
 ValidatorFactoryScopedContext validatorFactoryScopedContext,
 MethodValidationConfiguration methodValidationConfiguration) {
 
 BeanMetaDataManager beanMetaDataManager = beanMetaDataManagers.computeIfAbsent(
 new BeanMetaDataManagerKey( validatorFactoryScopedContext.getParameterNameProvider(), valueExtractorManager, methodValidationConfiguration ),
 key -> new BeanMetaDataManager(
  `constraintHelper`,
  executableHelper,
  typeResolutionHelper,
  validatorFactoryScopedContext.getParameterNameProvider(),
  valueExtractorManager,
  validationOrderGenerator,
  buildDataProviders(),
  methodValidationConfiguration
 )
 );
  
    return `new ValidatorImpl`(
  constraintValidatorFactory,
  beanMetaDataManager,
  valueExtractorManager,
  constraintValidatorManager,
  validationOrderGenerator,
  validatorFactoryScopedContext
 );
}
public final <T> Set<ConstraintViolation<T>> validate(T object, Class<?>... groups) {
 Contracts.assertNotNull( object, MESSAGES.validatedObjectMustNotBeNull() );
 sanityCheckGroups( groups );

 ValidationContext<T> validationContext = `getValidationContextBuilder().forValidate( object )`;

 if ( !validationContext.getRootBeanMetaData().hasConstraints() ) {
 return Collections.emptySet();
 }

 ValidationOrder validationOrder = determineGroupValidationOrder( groups );
 ValueContext<?, Object> valueContext = `ValueContext.getLocalExecutionContext`(
  validatorScopedContext.getParameterNameProvider(),
  object,
  validationContext.getRootBeanMetaData(),
  PathImpl.createRootPath()
 );

 return validateInContext( validationContext, valueContext, validationOrder );
}

1、getValidator->createValidator->ValidatorImpl->validate

在執行過程中封裝了beanMetaDataManager、validationContext、valueContext等內容，都是校驗時會用到的上下文信息，如待校驗bean的所有校驗項（含父類和接口）、property、method parameter的校驗信息，從ValidatorFactoryScopedContext繼承過來的validator通用的各種工具類（如message、script等的處理）等，內容比較復雜

2、分組（group）校驗忽略，來到默認分組處理validateConstraintsForDefaultGroup->validateConstraintsForSingleDefaultGroupElement->validateMetaConstraint(注：metaConstraints維護了該bean類型及其父類、接口的所有校驗，需要遍歷調用validateMetaConstraint)

3、繼續調用MetaConstraint的doValidateConstraint方法，根據不同的annotation type走不同的ConstraintTree

public static <U extends Annotation> ConstraintTree<U> of(ConstraintDescriptorImpl<U> composingDescriptor, Type validatedValueType) {
 if ( composingDescriptor.getComposingConstraintImpls().isEmpty() ) {
 return new SimpleConstraintTree<>( composingDescriptor, validatedValueType );
 }
 else {
 return new ComposingConstraintTree<>( composingDescriptor, validatedValueType );
 }
}

4、具體哪些走simple，哪些走composing暫且不管，因為二者都調用了ConstraintTree的'getInitializedConstraintValidator'方法，該步用來獲取校驗annotation（如DecimalMax、NotEmpty等）對應的validator并初始化validator

5、 ConstraintHelper 類維護了所有builtin的validator，并根據校驗annotation（如DecimalMax）分類，validator的描述類中維護了該validator的泛型模板（如BigDecimal），如下：

putConstraints( tmpConstraints, DecimalMax.class, Arrays.asList(
 DecimalMaxValidatorForBigDecimal.class,
 DecimalMaxValidatorForBigInteger.class,
 DecimalMaxValidatorForDouble.class,
 DecimalMaxValidatorForFloat.class,
 DecimalMaxValidatorForLong.class,
 DecimalMaxValidatorForNumber.class,
 DecimalMaxValidatorForCharSequence.class,
 DecimalMaxValidatorForMonetaryAmount.class
) );

在獲取具體bean類的validator時，先根據annotation獲取所有的validator，對應方法是ConstraintManager.findMatchingValidatorDescriptor，然后根據被校驗對象的類型獲取唯一的validator

6、然后根據上下文信息initializeValidator，進而調用validator的isValid方法校驗

以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: