#!/usr/bin/python 
# -*- coding: utf-8 -*- 
 
 
import sys, random 
from PyQt4 import QtCore, QtGui 
 
 
class Tetris(QtGui.QMainWindow): 
  #Tetris的構造函數，由于是QMainWindow的子類，所以要先調用父類的構造函數 
  def __init__(self): 
    super(Tetris, self).__init__() 
    #QtGui.QMainWindow.__init__(self) 
    self.initUI() 
     
     
  def initUI(self):   
 
    self.tboard = Board(self)  #創建一個Board類的實例 
    self.setCentralWidget(self.tboard) #將游戲窗口放到屏幕的中間 
 
    self.statusbar = self.statusBar()  #創建狀態欄    
    self.tboard.msg2Statusbar[str].connect(self.statusbar.showMessage) #3種可能的信息：1.score 2.game over 3.pause 
     
    self.tboard.start() #開始初始化程序 
     
    self.resize(180, 380)  #游戲窗口的大小 
    #self.resize(480, 380)  #游戲窗口的大小 
    self.center() 
    self.setWindowTitle('Tetris')  #窗口的名字     
    self.show() #這句一定不能忘了，顯示窗口 
     
 
  def center(self): 
    #將游戲窗口放到屏幕的中間 
    screen = QtGui.QDesktopWidget().screenGeometry() 
    size = self.geometry() 
    self.move((screen.width()-size.width())/2,  
      (screen.height()-size.height())/2) 
     
 
class Board(QtGui.QFrame): 
   
  msg2Statusbar = QtCore.pyqtSignal(str) 
   
  #游戲窗口的寬和高（單位為塊） 
  BoardWidth = 10   #寬度為10塊 
  BoardHeight = 22  #高度為22塊 
  Speed = 300 #游戲的速度 
 
  def __init__(self, parent): 
    super(Board, self).__init__(parent) 
     
    self.initBoard() 
     
     
  def initBoard(self):    
    ''''' 
    初始化一些關鍵的變量 
    ''' 
    self.timer = QtCore.QBasicTimer()  #創建一個定時器 
    self.isWaitingAfterLine = False 
     
    self.curX = 0 
    self.curY = 0 
    self.numLinesRemoved = 0 
    #a list of numbers from 0-7. 
    #It represents the position of various shapes and remains of the shapes on the board. 
    self.board = []  
     
 
    self.setFocusPolicy(QtCore.Qt.StrongFocus) 
    self.isStarted = False 
    self.isPaused = False 
    self.clearBoard() 
     
  #determine the type of a shape at a given block.   
  #返回(x,y)坐標處對應的點的類型 
  def shapeAt(self, x, y): 
    return self.board[(y * Board.BoardWidth) + x] 
 
  #設置(x,y)坐標處對應的點的類型 
  def setShapeAt(self, x, y, shape): 
    self.board[(y * Board.BoardWidth) + x] = shape 
     
  #calculate the width of the single square in pixels and return it 
  #The Board.BoardWidth is the size of the board in blocks 
  def squareWidth(self): 
    return self.contentsRect().width() / Board.BoardWidth 
     
 
  def squareHeight(self): 
    return self.contentsRect().height() / Board.BoardHeight 
     
 
  def start(self): 
     
    if self.isPaused:  #如果暫停，直接返回 
      return 
 
    self.isStarted = True 
    self.isWaitingAfterLine = False 
    self.numLinesRemoved = 0 
    self.clearBoard() 
 
    self.msg2Statusbar.emit(str(self.numLinesRemoved)) 
 
    self.newPiece() 
    self.timer.start(Board.Speed, self) 
 
     
  def pause(self): 
     
    if not self.isStarted: 
      return 
 
    self.isPaused = not self.isPaused 
     
    if self.isPaused: 
      self.timer.stop() 
      self.msg2Statusbar.emit("paused") 
       
    else: 
      self.timer.start(Board.Speed, self) 
      self.msg2Statusbar.emit(str(self.numLinesRemoved)) 
 
    self.update() 
 
     
  def paintEvent(self, event): 
     
    painter = QtGui.QPainter(self) 
    rect = self.contentsRect() 
 
    boardTop = rect.bottom() - Board.BoardHeight * self.squareHeight() 
 
    for i in range(Board.BoardHeight): 
      for j in range(Board.BoardWidth): 
        shape = self.shapeAt(j, Board.BoardHeight - i - 1) 
         
        if shape != Tetrominoe.NoShape: 
          self.drawSquare(painter, 
            rect.left() + j * self.squareWidth(), 
            boardTop + i * self.squareHeight(), shape) 
 
    if self.curPiece.shape() != Tetrominoe.NoShape: 
       
      for i in range(4): 
         
        x = self.curX + self.curPiece.x(i) 
        y = self.curY - self.curPiece.y(i) 
        self.drawSquare(painter, rect.left() + x * self.squareWidth(), 
          boardTop + (Board.BoardHeight - y - 1) * self.squareHeight(), 
          self.curPiece.shape()) 
 
  #按鍵相應函數 
  def keyPressEvent(self, event): 
    #如果游戲沒有開始（暫停）或者curPiece為空（游戲結束），響應父窗口的按鍵事件，返回 
    if not self.isStarted or self.curPiece.shape() == Tetrominoe.NoShape: 
      super(Board, self).keyPressEvent(event) 
      return 
     
    key = event.key()  #捕獲按鍵 
     
    if key == QtCore.Qt.Key_P: #如果按鍵為P，暫停或者重新繼續 
      self.pause() 
      return 
       
    if self.isPaused:  #暫停時不響應按鍵 
      return 
         
    elif key == QtCore.Qt.Key_Left:   #如果按下了左箭頭會嘗試向左移動（也有可能移動不了） 
      self.tryMove(self.curPiece, self.curX - 1, self.curY) 
       
    elif key == QtCore.Qt.Key_Right: 
      self.tryMove(self.curPiece, self.curX + 1, self.curY) 
       
    elif key == QtCore.Qt.Key_Down:   #按下下箭頭，向右旋轉 
      self.tryMove(self.curPiece.rotateRight(), self.curX, self.curY) 
       
    elif key == QtCore.Qt.Key_Up:    #按下上箭頭，向左旋轉 
      self.tryMove(self.curPiece.rotateLeft(), self.curX, self.curY) 
       
    elif key == QtCore.Qt.Key_Space:  #按下空格鍵，直接掉到底部 
      self.dropDown() 
       
    elif key == QtCore.Qt.Key_D: 
      self.oneLineDown() 
       
    else: 
      super(Board, self).keyPressEvent(event) 
         
 
  def timerEvent(self, event): 
    ''''' 
    we either create a new piece, after the previous one was dropped to the bottom, 
    or we move a falling piece one line down. 
    ''' 
    if event.timerId() == self.timer.timerId(): 
       
      if self.isWaitingAfterLine: 
        self.isWaitingAfterLine = False 
        self.newPiece() 
      else: 
        self.oneLineDown() 
         
    else: 
      super(Board, self).timerEvent(event) 
 
       
  def clearBoard(self): 
    #  清除board，全部設置為NoShape 
    for i in range(Board.BoardHeight * Board.BoardWidth): 
      self.board.append(Tetrominoe.NoShape) 
 
     
  def dropDown(self): 
     
    newY = self.curY 
     
    while newY > 0: 
      #使curPiece一直沿著y減小的方向移動，直到不能移動或者到達底部為止 
      if not self.tryMove(self.curPiece, self.curX, newY - 1): 
        break        
      newY -= 1  #自減1 
 
    self.pieceDropped() 
     
 
  def oneLineDown(self): 
     
    if not self.tryMove(self.curPiece, self.curX, self.curY - 1): 
      self.pieceDropped() 
       
  #到達底部的時候 
  def pieceDropped(self): 
     
    for i in range(4): 
       
      x = self.curX + self.curPiece.x(i) 
      y = self.curY - self.curPiece.y(i) 
      self.setShapeAt(x, y, self.curPiece.shape()) 
     
    self.removeFullLines() #清除排滿的行 
 
    if not self.isWaitingAfterLine: #如果不是在暫停，開始新的塊 
      self.newPiece() 
       
 
  def removeFullLines(self): 
    ''''' 
    If the piece hits the bottom, we call the removeFullLines() method. 
    We find out all full lines and remove them. 
    We do it by moving all lines above the current full line to be removed one line down. 
    Notice that we reverse the order of the lines to be removed. 
    Otherwise, it would not work correctly. 
    In our case we use a naive gravity. This means, that the pieces may be floating above empty gaps. 
    ''' 
    numFullLines = 0 
    rowsToRemove = [] 
 
    for i in range(Board.BoardHeight): 
       
      n = 0  #n記錄每行shape的個數 
      for j in range(Board.BoardWidth): 
        if not self.shapeAt(j, i) == Tetrominoe.NoShape: 
          n = n + 1 
      #如果n等于10，將行號加入要刪除的隊列 
      if n == 10: 
        rowsToRemove.append(i) 
 
    rowsToRemove.reverse() #行號隊列反置 
     
 
    for m in rowsToRemove: 
      #從m行以上的shape均下移一行 
      for k in range(m, Board.BoardHeight): 
        for l in range(Board.BoardWidth): 
            self.setShapeAt(l, k, self.shapeAt(l, k + 1)) 
 
    numFullLines = numFullLines + len(rowsToRemove) #統計消除的行數 
 
    if numFullLines > 0: 
       
      self.numLinesRemoved = self.numLinesRemoved + numFullLines 
      self.msg2Statusbar.emit(str(self.numLinesRemoved)) 
         
      self.isWaitingAfterLine = True 
      self.curPiece.setShape(Tetrominoe.NoShape) 
      self.update() 
       
 
  def newPiece(self): 
    ''''' 
    The newPiece() method creates randomly a new tetris piece. 
    If the piece cannot go into its initial position, the game is over. 
    隨機地創建一個方塊。如果方塊不能在它起始的位置，游戲結束。 
    ''' 
    self.curPiece = Shape()   #當前塊 
    self.curPiece.setRandomShape() #隨機設置 
    self.curX = Board.BoardWidth / 2 + 1    #current X位置在中心 
    self.curY = Board.BoardHeight - 1 + self.curPiece.minY() 
     
 
    #將self.curPiece移動到當前的坐標處，如果不能移動，游戲結束。 
    #curPiece置為空，timer停止，顯示消息'game over' 
    if not self.tryMove(self.curPiece, self.curX, self.curY): 
        
      self.curPiece.setShape(Tetrominoe.NoShape) 
      self.timer.stop() 
      self.isStarted = False 
      self.msg2Statusbar.emit("Game over") 
 
 
 
  def tryMove(self, newPiece, newX, newY): 
    ''''' 
    如果the shape is at the edge of the board 或者 is adjacent to some other piece, 返回False 
    否則的話，變動位置并返回True 
    ''' 
    for i in range(4): 
       
      x = newX + newPiece.x(i) 
      y = newY - newPiece.y(i) 
      ''''' 
      如果x<0說明已經到了左邊緣;如果x>=Board.BoardWidth,說明已經到了右邊緣 
      如果y<0說明已經到了底部;如果x>=Board.BoardHeight,說明已經到了最頂部 
      以上情況均不能移動，返回False 
      ''' 
      if x < 0 or x >= Board.BoardWidth or y < 0 or y >= Board.BoardHeight: 
        return False 
      #如果當前的位置不為空，返回False 
      if self.shapeAt(x, y) != Tetrominoe.NoShape: 
        return False 
 
    self.curPiece = newPiece 
    self.curX = newX  #現在的坐標變?yōu)樾伦鴺?biāo) 
    self.curY = newY 
    self.update()  #frame更新 
     
    return True 
     
 
  def drawSquare(self, painter, x, y, shape): 
     
    colorTable = [0x000000, 0xCC6666, 0x66CC66, 0x6666CC, 
           0xCCCC66, 0xCC66CC, 0x66CCCC, 0xDAAA00] 
 
    color = QtGui.QColor(colorTable[shape]) 
    painter.fillRect(x + 1, y + 1, self.squareWidth() - 2,  
      self.squareHeight() - 2, color) 
 
    painter.setPen(color.light()) 
    painter.drawLine(x, y + self.squareHeight() - 1, x, y) 
    painter.drawLine(x, y, x + self.squareWidth() - 1, y) 
 
    painter.setPen(color.dark()) 
    painter.drawLine(x + 1, y + self.squareHeight() - 1, 
      x + self.squareWidth() - 1, y + self.squareHeight() - 1) 
    painter.drawLine(x + self.squareWidth() - 1,  
      y + self.squareHeight() - 1, x + self.squareWidth() - 1, y + 1) 
 
 
class Tetrominoe(object): 
  ''''' 
  定義游戲中出現的形狀，共有8種，分別用0-7表示。 
  其中0表示沒有形狀，1-7表示可能出現的形狀：Z,S,Line,T,Square,L,MirroredL。 
   
  相當于C++中的枚舉類型，用有意義的字符串名代替數字 
  ''' 
  NoShape = 0 
  ZShape = 1 
  SShape = 2 
  LineShape = 3 
  TShape = 4 
  SquareShape = 5 
  LShape = 6 
  MirroredLShape = 7 
 
 
class Shape(object): 
  ''''' 
  Shape類保存每種方塊的信息 
  ''' 
  #coordsTable tuple holds all possible coordinate values of our Tetris pieces. 0-7 
  coordsTable = ( 
    ((0, 0),   (0, 0),   (0, 0),   (0, 0)), 
    ((0, -1),  (0, 0),   (-1, 0),  (-1, 1)), 
    ((0, -1),  (0, 0),   (1, 0),   (1, 1)), 
    ((0, -1),  (0, 0),   (0, 1),   (0, 2)), 
    ((-1, 0),  (0, 0),   (1, 0),   (0, 1)), 
    ((0, 0),   (1, 0),   (0, 1),   (1, 1)), 
    ((-1, -1),  (0, -1),  (0, 0),   (0, 1)), 
    ((1, -1),  (0, -1),  (0, 0),   (0, 1)) 
  ) 
 
  def __init__(self): 
     
    self.coords = [[0,0] for i in range(4)]   #[[0, 0], [0, 0], [0, 0], [0, 0]] 
    self.pieceShape = Tetrominoe.NoShape 
 
    self.setShape(Tetrominoe.NoShape) 
     
  #返回當前shape類型 
  def shape(self): 
    return self.pieceShape 
     
 
  def setShape(self, shape): 
     
    table = Shape.coordsTable[shape]  #table是對應的tuple元組 
    #將對應的table賦給self.coords 
    for i in range(4): 
      for j in range(2): 
        self.coords[i][j] = table[i][j] 
 
    self.pieceShape = shape 
     
  #隨機獲取一個塊形狀（從1，2，3，4，5，6，7中隨機選1個） 
  def setRandomShape(self): 
    self.setShape(random.randint(1, 7)) 
 
  #返回index的x坐標,index是從0-3，分別表示方塊對應的4個點 
  def x(self, index): 
    return self.coords[index][0] 
 
  #返回index的y坐標  
  def y(self, index): 
    return self.coords[index][1] 
 
  #設置當前index的x坐標 
  def setX(self, index, x): 
    self.coords[index][0] = x 
 
  #設置當前index的y坐標 
  def setY(self, index, y): 
    self.coords[index][1] = y 
 
  #返回當前塊的最小x坐標 
  def minX(self):  
    m = self.coords[0][0]   
    for i in range(4): 
      m = min(m, self.coords[i][0]) 
    return m 
 
  #返回當前塊的最大x坐標   
  def maxX(self): 
    m = self.coords[0][0] 
    for i in range(4): 
      m = max(m, self.coords[i][0]) 
    return m 
 
  #返回當前塊的最小y坐標   
  def minY(self):    
    m = self.coords[0][1] 
    for i in range(4): 
      m = min(m, self.coords[i][1]) 
    return m 
 
  #返回當前塊的最大y坐標  
  def maxY(self):    
    m = self.coords[0][1] 
    for i in range(4): 
      m = max(m, self.coords[i][1]) 
    return m 
 
     
  def rotateLeft(self):  #rotate a piece to the left 
    #如果塊是方塊的話，直接返回當前塊，不做任何處理 
    if self.pieceShape == Tetrominoe.SquareShape: 
      return self 
 
    result = Shape() 
    result.pieceShape = self.pieceShape    
    for i in range(4):     
      #將i點的x坐標換為y坐標 
      result.setX(i, self.y(i)) 
      #將i點的y坐標換為-x坐標 
      result.setY(i, -self.x(i)) 
    #返回新的左旋后的方塊 
    return result 
 
     
  def rotateRight(self): 
    #如果塊是方塊的話，直接返回當前塊，不做任何處理 
    if self.pieceShape == Tetrominoe.SquareShape: 
      return self 
 
    result = Shape() 
    result.pieceShape = self.pieceShape   
    for i in range(4): 
      #將i點的x坐標換為-y坐標 
      result.setX(i, -self.y(i)) 
      #將i點的y坐標換為x坐標 
      result.setY(i, self.x(i)) 
    #返回新的右旋后的方塊 
    return result 
 
 
''''' 
The game is simplified a bit so that it is easier to understand. 
The game starts immediately after it is launched. 
We can pause the game by pressing the p key. 
The space key will drop the Tetris piece instantly to the bottom. 
The game goes at constant speed, no acceleration is implemented. 
The score is the number of lines that we have removed. 
 
''' 
def main(): 
  #創建一個界面app 
  app = QtGui.QApplication([]) 
  #創建一個俄羅斯方塊類 
  tetris = Tetris()   
  #進入主循環 
  app.exec_() 
 
 
if __name__ == '__main__': 
  main()