使用Kubeadm在CentOS7.2上部署Kubernetes集群的方法
更新時間：2018年03月09日 09:13:56 作者：Jackson_csdn
本篇文章主要介紹了使用Kubeadm在CentOS7.2上部署Kubernetes集群的方法，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
本文參考kubernetes官網文章Installing Kubernetes on Linux with kubeadm在CentOS7.2使用Kubeadm部署Kuebernetes集群，解決了一些在按照該文檔部署時遇到的問題。
操作系統版本
# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core)
內核版本
# uname -r 3.10.0-327.el7.x86_64
集群節點
192.168.120.122 kube-master 192.168.120.123 kube-agent1 192.168.120.124 kube-agent2 192.168.120.125 kube-agent3
即該集群包含一個控制節點和三個工作節點。
部署前的準備
配置可以訪問google相關網站
這種部署方式使用的軟件包由google相關源提供，因此集群節點必須能夠訪問外網，至于如何配置請自行解決。
關閉防火墻
# systemctl stop firewalld.service && systemctl disable firewalld.service
禁用SELinux
# setenforce 0 # sed -i.bak 's/SELINUX=enforcing/SELINUX=permissive/' /etc/selinux/config
配置yum源
# cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg
https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
EOF
安裝kubelet和kubeadm
在所有節點上安裝以下軟件包：
# yum install -y docker kubelet kubeadm kubectl kubernetes-cni # systemctl enable docker && systemctl start docker # systemctl enable kubelet && systemctl start kubelet
然后設置內核參數：
# sysctl net.bridge.bridge-nf-call-iptables=1 # sysctl net.bridge.bridge-nf-call-ip6tables=1
初始化控制節點
# kubeadm init --pod-network-cidr=10.244.0.0/16
因?yàn)樵谠摷褐袑⑹褂胒lannel搭建pod網絡，因此必須添加–pod-network-cidr參數。
注意：初始化較慢，因?yàn)樵撨^(guò)程會pull一些docker image。
該命令的輸出如下：
Initializing your master... [kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters. [init] Using Kubernetes version: v1.6.4 [init] Using Authorization mode: RBAC [preflight] Running pre-flight checks [certificates] Generated CA certificate and key. [certificates] Generated API server certificate and key. [certificates] API Server serving cert is signed for DNS names [kube-master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.120.122] [certificates] Generated API server kubelet client certificate and key. [certificates] Generated service account token signing key and public key. [certificates] Generated front-proxy CA certificate and key. [certificates] Generated front-proxy client certificate and key. [certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki" [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf" [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf" [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf" [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf" [apiclient] Created API client, waiting for the control plane to become ready [apiclient] All control plane components are healthy after 1377.560339 seconds [apiclient] Waiting for at least one node to register [apiclient] First node has registered after 6.039626 seconds [token] Using token: 60bc68.e94800f3c5c4c2d5 [apiconfig] Created RBAC rules [addons] Created essential addon: kube-proxy [addons] Created essential addon: kube-dns Your Kubernetes master has initialized successfully! To start using your cluster, you need to run (as a regular user): sudo cp /etc/kubernetes/admin.conf $HOME/ sudo chown $(id -u):$(id -g) $HOME/admin.conf export KUBECONFIG=$HOME/admin.conf You should now deploy a pod network to the cluster. Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at: http://kubernetes.io/docs/admin/addons/ You can now join any number of machines by running the following on each node as root: kubeadm join --token <token> 192.168.120.122:6443
觀察控制節點的docker image：
# docker images REPOSITORY TAG IMAGE ID CREATED SIZE gcr.io/google_containers/kube-apiserver-amd64 v1.6.4 4e3810a19a64 2 days ago 150.6 MB gcr.io/google_containers/kube-controller-manager-amd64 v1.6.4 0ea16a85ac34 2 days ago 132.8 MB gcr.io/google_containers/kube-proxy-amd64 v1.6.4 e073a55c288b 2 days ago 109.2 MB gcr.io/google_containers/kube-scheduler-amd64 v1.6.4 1fab9be555e1 2 days ago 76.75 MB gcr.io/google_containers/etcd-amd64 3.0.17 243830dae7dd 12 weeks ago 168.9 MB gcr.io/google_containers/pause-amd64 3.0 99e59f495ffa 12 months ago 746.9 kB
按照初始化命令的提示執行以下操作：
# cp /etc/kubernetes/admin.conf $HOME/ # chown $(id -u):$(id -g) $HOME/admin.conf # export KUBECONFIG=$HOME/admin.conf
隔離控制節點
# kubectl taint nodes --all node-role.kubernetes.io/master- node "kube-master" tainted
安裝pod網絡
# kubectl apply -f flannel/Documentation/kube-flannel-rbac.yml clusterrole "flannel" created clusterrolebinding "flannel" created # kubectl apply -f flannel/Documentation/kube-flannel.yml serviceaccount "flannel" created configmap "kube-flannel-cfg" created daemonset "kube-flannel-ds" created
可以通過git clone flannel倉庫：
# git clone https://github.com/coreos/flannel.git
添加工作節點
# kubeadm join --token <token> 192.168.120.122:6443
該操作輸出如下：
[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters. [preflight] Running pre-flight checks [discovery] Trying to connect to API Server "192.168.120.122:6443" [discovery] Created cluster-info discovery client, requesting info from "https://192.168.120.122:6443" [discovery] Cluster info signature and contents are valid, will use API Server "https://192.168.120.122:6443" [discovery] Successfully established connection with API Server "192.168.120.122:6443" [bootstrap] Detected server version: v1.6.4 [bootstrap] The server supports the Certificates API (certificates.k8s.io/v1beta1) [csr] Created API client to obtain unique certificate for this node, generating keys and certificate signing request [csr] Received signed certificate from the API server, generating KubeConfig... [kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf" Node join complete: * Certificate signing request sent to master and response received. * Kubelet informed of new secure connection details. Run 'kubectl get nodes' on the master to see this machine join.
在控制節點觀察集群狀態
# kubectl get nodes NAME STATUS AGE VERSION kube-agent1 Ready 16m v1.6.3 kube-agent2 Ready 16m v1.6.3 kube-agent3 Ready 16m v1.6.3 kube-master Ready 37m v1.6.3 # kubectl get pods --all-namespaces -o wide NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE kube-system etcd-kube-master 1/1 Running 0 32m 192.168.120.122 kube-master kube-system kube-apiserver-kube-master 1/1 Running 7 32m 192.168.120.122 kube-master kube-system kube-controller-manager-kube-master 1/1 Running 0 32m 192.168.120.122 kube-master kube-system kube-dns-3913472980-3x9wh 3/3 Running 0 37m 10.244.0.2 kube-master kube-system kube-flannel-ds-1m4wz 2/2 Running 0 18m 192.168.120.122 kube-master kube-system kube-flannel-ds-3jwf5 2/2 Running 0 17m 192.168.120.123 kube-agent1 kube-system kube-flannel-ds-41qbs 2/2 Running 4 17m 192.168.120.125 kube-agent3 kube-system kube-flannel-ds-ssjct 2/2 Running 4 17m 192.168.120.124 kube-agent2 kube-system kube-proxy-0mmfc 1/1 Running 0 17m 192.168.120.124 kube-agent2 kube-system kube-proxy-23vwr 1/1 Running 0 17m 192.168.120.125 kube-agent3 kube-system kube-proxy-5q8vq 1/1 Running 0 17m 192.168.120.123 kube-agent1 kube-system kube-proxy-8srwn 1/1 Running 0 37m 192.168.120.122 kube-master kube-system kube-scheduler-kube-master 1/1 Running 0 32m 192.168.120.122 kube-master
至此，完成Kubernetes集群的部署。
以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
CentoS6.5環境下redis4.0.1(stable)安裝和主從復制配置方法
這篇文章主要介紹了CentoS6.5環境下redis4.0.1(stable)安裝和主從復制配置方法,結合實例形式分析了CentoS6.5下redis4.0.1的安裝和主從復制配置相關步驟、命令與操作注意事項,需要的朋友可以參考下2018-04-04
詳解如何實現Linux服務Crash后自動重啟
近期碰到了一個?Linux?Systemd?服務?Crash,?Crash?后需要人工介入重啟.?那么,?有沒有辦法如何實現?Linux?服務?Crash?后自動重啟，下面就來和大家分享一下2023-08-08
淺談簡單使用CentOS7防火墻及開放端口
這篇文章主要介紹了淺談簡單使用CentOS7防火墻及開放端口，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2018-09-09
Linux Socket 編程簡介和實現
這篇文章主要介紹了Linux Socket 編程簡介和實現，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2018-02-02
這篇文章主要介紹了阿里云域名和ip綁定步驟方法實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-07-07
這篇文章主要給大家介紹了Linux shell中的test命令用法的相關資料，test命令是shell環境中測試條件表達式的實用工具，文中介紹的非常詳細，需要的朋友可以參考借鑒，下面來一起看看吧。2017-04-04
這篇文章主要介紹了Linux seq命令的使用詳解，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-02-02
使用Samba在Linux服務器上搭建共享文件服務的方法
Samba是在Linux和UNIX系統上實現SMB協議的一個免費軟件，由服務器及客戶端程序構成。這篇文章主要介紹了使用Samba在Linux服務器上搭建共享文件服務 ,需要的朋友可以參考下2019-05-05
LINUX服務器安裝SVN服務實現方式
本文介紹了如何使用yum安裝Subversion,創建版本庫,配置SVN服務,并解決常見問題,詳細步驟包括安裝Subversion,查看安裝版本和位置,創建存放版本庫的目錄及svn版本庫,配置權限控制,啟動svn版本庫,以及處理端口訪問權限等2024-09-09
Iptables是專為L(zhǎng)inux操作系統打造的極其靈活的防火墻工具。對Linux極客玩家和系統管理員來說，iptables非常有用。本文將向你展示如何配置最通用的Linux防火墻2014-03-03