multicast的兩條命令
ip igmp join-group與ip igmp static-group的區別？
To configure the router to be a statically connected member of the specified group on the interface, use the ip igmp static-group command in interface configuration mode
To have the router join a multicast group, use the ip igmp join-group command in interface configuration mode
以下有例為證
ip igmp static-group 224.5.5.5
(*, 224.5.5.5), 00:01:06/00:02:24, RP 0.0.0.0, flags: DC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Loopback0, Forward/Sparse, 00:01:06/00:02:24
ip igmp join-group 224.6.6.6
(*, 224.6.6.6), 00:00:02/00:02:58, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Loopback0, Forward/Sparse, 00:00:02/00:02:58
相關文章
基于寬帶接入網絡遠程視頻監控系統
基于寬帶接入網絡遠程視頻監控系統...2007-09-09
Win Server 2003秘笈放送...2007-09-09
交換機基礎知識與常見相關術語...2007-09-09
Cisco Catalyst 4506雙機熱備配置...2007-09-09
二，三，四層交換機的區別...2007-09-09
網絡克隆教程...2007-09-09
2500接入服務器配置...2007-09-09
IE地址欄消失問題的巧妙解決2007-09-09
一機多功能的網絡邊緣路由器...2007-09-09
短距離小型網間網實驗平臺的搭建...2007-09-09