Docker高級教程之智能添加與修改防火墻規則
更新時間：2017年01月25日 09:25:07 作者：chengxuyuanyonghu
這篇文章主要介紹了Docker高級教程之智能添加與修改防火墻規則,需要的朋友可以參考下
資料簡介：如果你有以下痛苦：
1、使用默認docker0橋接方式；
2、修改防火墻規則的話，使用手動修改配置；
3、并且修改時候還得計算來源端口，防止重復端口使用戶登陸錯誤容器；
4、并當容器意外重啟，內網ip變化后還得修改規則
那么你可以看看本文了，對你這些痛處都有解決方法。
目前docker容器設置訪問規則的話，就2個方法
1、在docker容器創建的時候，使用-p來設置
2、在容器運行中，獲取容器的ip，然后在宿主機的iptables力通過nat鏈做dnat設置
我之前一直使用第2個方法，但隨著我docker項目的增加（目前我這里研發使用docker的容器做測試機），防火墻的訪問規則設置起來十分麻煩，并且之前規劃沒有弄好，容器的網絡還是默認的docker0橋接方式，這樣容器一掛或者異常問題、docker daemon重啟，都會導致容器的ip變更，變更后就得修改防火墻策略，十分的麻煩。
為了解決這個問題，我開發了2個程序，1個是持久化固定容器ip，另外一個是智能防火墻，下面是關于智能防火墻功能的介紹。
一、介紹
1、編寫語言
python
2、運行環境
容器需要使用我之前寫的持久化固定ip方式來創建
需要額外安裝的python模塊
etcd
docker
nmap
3、基本宿主機防火墻（包含filter鏈與nat鏈）
默認在/root/firewall里有個基礎的宿主機防火墻，里面包含filter鏈與nat鏈，我的防火墻程序先獲取這個文件，然后在從etcd里獲取各容器的防火墻結合后是新的規則，如下面是我的
[root@docker-test3 firewall]# cat /root/firewall/iptables_base.txt *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1:83] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i em1 -j ACCEPT -A INPUT -i ovs1 -j ACCEPT #forllow is room network -A INPUT -s 117.121.x.0/24 -p tcp -m multiport --dports 50020 -j ACCEPT -A INPUT -p tcp -j REJECT --reject-with tcp-reset -A FORWARD -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK RST -m limit --limit 1/sec -j ACCEPT COMMIT # Completed on Fri Dec 6 10:59:13 2013 *nat :PREROUTING ACCEPT [2:269] :POSTROUTING ACCEPT [1739:127286] :OUTPUT ACCEPT [1739:127286] :DOCKER - [0:0] -A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER -A POSTROUTING -s 172.16.0.0/16 ! -d 172.16.0.0/16 -j MASQUERADE -A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER COMMIT
其中50020是ssh端口,117.121.x.0/24是允許的網段，x的意思保密，不讓你們看我的網絡。
4、代碼
#!/usr/bin/env python
#-*- coding: utf-8 -*-
#author:Deng Lei
#email: dl528888@gmail.com
import os
import sys
import argparse
import etcd
import time
import socket, struct, fcntl
from docker import Client
import subprocess
import shutil
import nmap
def get_local_ip(iface = 'em1'):
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sockfd = sock.fileno()
SIOCGIFADDR = 0x8915
ifreq = struct.pack('16sH14s', iface, socket.AF_INET, 'x00'*14)
try:
res = fcntl.ioctl(sockfd, SIOCGIFADDR, ifreq)
except:
return None
ip = struct.unpack('16sH2x4s8x', res)[2]
return socket.inet_ntoa(ip)
def docker_container_all():
docker_container=docker_client.containers(all=True)
container_name=[]
container_stop_name=[]
for i in docker_container:
container_name.append(i['Names'])
for b in container_name:
for c in b:
container_stop_name.append(c)
return container_stop_name
def docker_container_run():
docker_container=docker_client.containers()
container_name=[]
container_stop_name=[]
for i in docker_container:
container_name.append(i['Names'])
for b in container_name:
for c in b:
container_stop_name.append(c[1::])
return container_stop_name
if __name__ == "__main__":
#follow is help info
p = argparse.ArgumentParser(description='It is userful tool to modify docker container firewall')
p.add_argument("container_name",help="list local docker container name")
p.add_argument("-l","--list",help="show container firewall rules",action="store_true")
p.add_argument("-a","--add",help="add container firewall rules",action="store_true")
p.add_argument("-r","--rm",help="rm container firewall rules")
p.add_argument("-m","--mode",choices=["internal","external"],help="set container firewall mode")
p.add_argument("-s","--source",help="source ip view container firewall rules")
p.add_argument("-sp","--sport",help="source port view container firewall rules")
p.add_argument("-d","--dest",help="destination ip container firewall rules")
p.add_argument("-dp","--dport",help="destination port view container firewall rules")
p.add_argument("-pm","--portmode",choices=["dynamic","manual"],help="set container port mode")
p.add_argument("-e","--effect",help="effect container firewall rules",action="store_true")
p.add_argument("-ap","--addip",help="add external ip to container")
p.add_argument("-rp","--rmip",help="rm external ip to container")
args = p.parse_args()
local_ip=get_local_ip('ovs1')
docker_etcd_key='/app/docker/'
etcd_client=etcd.Client(host='127.0.0.1', port=4001)
docker_client = Client(base_url='unix://var/run/docker.sock', version='1.15', timeout=10)
docker_container_all_name=docker_container_all()
portmode='manual'
container_ip=''
#get container ip
r = etcd_client.read('%s%s'%(docker_etcd_key,local_ip), recursive=True, sorted=True)
for child in r.children:
if child.dir is not True and args.container_name in child.key and 'firewall' not in child.key:
container_ip=eval(child.value)['Container_ip']
if len(container_ip) == 0 and args.container_name != "all":
print 'This container:%s info is not in etcd!'%args.container_name
sys.exit(1)
if '/'+args.container_name not in docker_container_all_name and args.container_name != "all":
print 'local host docker is not container:%s!'%args.container_name
sys.exit(1)
if args.list:
try:
now_firewall_rule=etcd_client.read('%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)).value
except KeyError:
print 'This container:%s is not firewall rule!'%args.container_name
sys.exit(1)
if len(now_firewall_rule) >0:
now_firewall_rule=eval(now_firewall_rule)
print 'Follow is container:%s firewall rule!'%args.container_name
for i in now_firewall_rule:
print i
else:
print 'This container:%s is not firewall rule!'%args.container_name
sys.exit(1)
if args.portmode=="dynamic":
try:
now_port=etcd_client.read('%s%s/firewall/now_port'%(docker_etcd_key,local_ip)).value
except KeyError:
now_port='40000'
now_port=int(now_port) + 1
key='%s%s/firewall/now_port'%(docker_etcd_key,local_ip)
etcd_client.write(key,now_port)
portmode=args.portmode
elif args.portmode=="manual":
if len(args.sport)>0:
now_port=args.sport
else:
print 'no input source port'
key='%s%s/firewall/now_port'%(docker_etcd_key,local_ip)
etcd_client.write(key,now_port)
#add docker container firewall rule
if args.add:
if args.mode:
if args.source:
if args.source == "all":
source_ip='0.0.0.0/0.0.0.0'
else:
source_ip=args.source
if args.portmode=="dynamic":
sport=now_port
else:
sport=args.sport
if args.dport:
dport=args.dport
else:
print 'please input dest port!This port is container local port!'
sys.exit(1)
try:
now_id=len(eval(etcd_client.read('%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)).value))
except KeyError:
now_id='0'
except SyntaxError:
now_id='0'
now_id = int(now_id) + 1
if args.mode=="internal":
msg={'Id':now_id,'Mode':args.mode,'Container_name':args.container_name,'Source_ip':source_ip,'Port_mode':portmode,'Source_port':'%s'%sport,'Local_port':dport,'Container_ip':container_ip}
else:
if args.dest:
msg={'Id':now_id,'Mode':args.mode,'Container_name':args.container_name,'Source_ip':source_ip,'Destination_ip':args.dest,'Port_mode':portmode,'Source_port':'%s'%sport,'Local_port':dport,'Container_ip':container_ip}
else:
print 'please input destination ip'
sys.exit(1)
#add rule to iptables
try:
now_firewall_rule=etcd_client.read('%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)).value
now_firewall_rule=eval(now_firewall_rule)
except KeyError:
now_firewall_rule=[]
except SyntaxError:
now_firewall_rule=[]
for i in now_firewall_rule:
if msg['Local_port'] == i['Local_port'] and msg['Source_ip'] == i['Source_ip'] and msg['Mode'] == i['Mode'] and msg['Container_name'] == i['Container_name'] and msg['Source_port'] == i['Source_port']:
print 'This rule had exist!'
sys.exit(1)
now_firewall_rule.append(msg)
key='%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)
etcd_client.write(key,now_firewall_rule)
for i in now_firewall_rule:
print i
#del exist firewall rule
if args.rm:
try:
now_info=eval(etcd_client.read('%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)).value)
except KeyError:
print 'This Container:%s is not firewall rule!'%args.container_name
sys.exit(1)
except SyntaxError:
print 'This container:%s is not firewall rule!'%args.container_name
sys.exit(1)
old_id=[i['Id'] for i in now_info]
if args.rm != 'all':
if int(args.rm) not in old_id:
print 'you input rule id %s is not exit!'%args.rm
sys.exit(1)
for i in now_info:
if int(args.rm) == i['Id']:
now_info.remove(i)
print 'Follow is container_name:%s new firewall rule!'%args.container_name
for i in now_info:
print i
key='%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)
etcd_client.write(key,now_info)
sys.exit(0)
else:
now_info=''
key='%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)
etcd_client.write(key,now_info)
print 'This container_name:%s is not firewall rule!'%args.container_name
sys.exit(0)
#effect container firewall rule
if args.effect:
#check firewall filter exist
config_dir='/root/firewall'
iptables_config='iptables_base.txt'
if os.path.exists(config_dir) is False:
os.mkdir(config_dir)
if os.path.isfile('%s/%s'%(config_dir,iptables_config)) is False:
print 'no found base iptables config in %s/%s!'%(config_dir,iptables_config)
sys.exit(1)
docker_container_run=docker_container_run()
etcd_exist_firewall=[]
if args.container_name != "all":
container_name=args.container_name
try:
now_info=eval(etcd_client.read('%s%s/firewall/nat-%s'%(docker_etcd_key,local_ip,args.container_name)).value)
msg=[]
msg.append('#follow is container:%s firewall rulen'%args.container_name)
for i in now_info:
if 'Destination_ip' not in i:
text='-A DOCKER -s %s ! -i ovs2 -p tcp -m tcp --dport %s -j DNAT --to-destination %s:%s'%(i['Source_ip'],i['Source_port'],i['Container_ip'].split('/')[0],i['Local_port'])
msg.append('%sn'%text)
else:
text='-A DOCKER -s %s -d %s ! -i ovs2 -p tcp -m tcp --dport %s -j DNAT --to-destination %s:%s'%(i['Source_ip'],i['Destination_ip'],i['Source_port'],i['Container_ip'].split('/')[0],i['Local_port'])
msg.append('%sn'%text)
except SyntaxError:
msg=''
#wirte container firewall rule
iptables_new_config='iptables_nat_%s.txt'%args.container_name
f=open('%s/%s'%(config_dir,iptables_new_config),'w')
for i in msg:
f.write(i)
f.close()
else:
r = etcd_client.read('%s%s/firewall'%(docker_etcd_key,local_ip), recursive=True, sorted=True)
for child in r.children:
if child.dir is not True and 'nat' in child.key and child.key.split('/')[-1].split('nat-')[-1] in docker_container_run:
#etcd_exist_firewall.append(child.key.split('/')[-1].split('nat-')[-1])
try:
now_info=eval(etcd_client.read(child.key).value)
msg=[]
msg.append('#follow is container:%s firewall rulen'%child.key.split('/')[-1].split('nat-')[-1])
for i in now_info:
if 'Destination_ip' not in i:
text='-A DOCKER -s %s ! -i ovs2 -p tcp -m tcp --dport %s -j DNAT --to-destination %s:%s'%(i['Source_ip'],i['Source_port'],i['Container_ip'].split('/')[0],i['Local_port'])
msg.append('%sn'%text)
else:
text='-A DOCKER -s %s -d %s ! -i ovs2 -p tcp -m tcp --dport %s -j DNAT --to-destination %s:%s'%(i['Source_ip'],i['Destination_ip'],i['Source_port'],i['Container_ip'].split('/')[0],i['Local_port'])
msg.append('%sn'%text)
except SyntaxError:
msg=''
#wirte container firewall rule
iptables_new_config='iptables_nat_%s.txt'%child.key.split('/')[-1].split('nat-')[-1]
f=open('%s/%s'%(config_dir,iptables_new_config),'w')
for i in msg:
f.write(i)
f.close()
#get now all container firewall rule
all_firewall_file=[]
for parent,dirnames,filenames in os.walk(config_dir):
for filename in filenames:
if 'iptables_nat' in filename:
all_firewall_file.append(os.path.join(parent,filename))
#get iptables base file line
count = len(open('%s/%s'%(config_dir,iptables_config),'rU').readlines())
modify_post=int(count)-1
f=open('%s/%s'%(config_dir,iptables_config),'r+')
flist=f.readlines()
flist[modify_post]=''
f=open
for i in all_firewall_file:
f=open(i)
try:
container_text=f.read()
finally:
f.close()
flist.append(container_text)
flist.append('COMMITn')
f=open('%s/temp_iptables.txt'%config_dir,'w')
for i in flist:
f.write(i)
f.close()
#apply new firewall rule
shutil.copy('%s/temp_iptables.txt'%config_dir,'/etc/sysconfig/iptables')
#restart firewall
firewall_status=((subprocess.Popen("systemctl restart iptables &>>/dev/null && echo 0 || echo 1",shell=True,stdout=subprocess.PIPE)).stdout.readlines()[0]).strip('n')
if firewall_status != "0":
print 'firewall rule has problem!'
sys.exit(1)
else:
print 'config firewall rule is success!'
sys.exit(0)
if args.addip:
if '/' not in args.addip:
print 'please input ip:netmask!'
sys.exit(1)
external_ip=args.addip.split('/')[0]
external_ip_netmask=args.addip.split('/')[1]
#nmap ip exist!
nm = nmap.PortScanner()
nmap_result=nm.scan(external_ip,'60020')['nmap']['scanstats']['uphosts']
if int(nmap_result) == 1:
print 'you input ip:%s is online!'%external_ip
sys.exit(1)
try:
now_ip=eval(etcd_client.read('%s%s/external_ip/%s'%(docker_etcd_key,local_ip,external_ip)).value)
if now_ip['Container_name'] != args.container_name:
print 'this is external ip:%s is has used by container:%s.if you want to use it again,please delete this key:%s.'%(args.addip,now_ip['Container_name'],'%s%s/external_ip/%s'%(docker_etcd_key,local_ip,external_ip))
sys.exit(1)
except KeyError:
pass
#get device info
try:
now_device=etcd_client.read('%s%s/external_ip/device'%(docker_etcd_key,local_ip)).value
except KeyError:
now_device='em2:0'
new_device=now_device.split(':')[0]+':'+str(int(now_device.split(':')[1])+1)
key='%s%s/external_ip/device'%(docker_etcd_key,local_ip)
etcd_client.write(key,new_device)
#add new external ip in localhost
if int(external_ip_netmask) == 8:
external_ip_netmask='255.0.0.0'
elif int(external_ip_netmask) == 16:
external_ip_netmask='255.255.0.0'
elif int(external_ip_netmask) == 24:
external_ip_netmask='255.255.255.0'
elif int(external_ip_netmask) == 32:
external_ip_netmask='255.255.255.255'
else:
print 'you input netmask %s i can not calculate'%external_ip_netmask
sys.exit(1)
add_external_ip_status=((subprocess.Popen("/sbin/ifconfig %s %s netmask %s up &>>/dev/null && echo 0 || echo 1"%(new_device,external_ip,external_ip_netmask),shell=True,stdout=subprocess.PIPE)).stdout.readlines()[0]).strip('n')
if add_external_ip_status != "0":
print 'add external ip:%s is fail!'%args.addip
sys.exit(1)
else:
print 'add external ip:%s is success!'%args.addip
key='%s%s/external_ip/%s'%(docker_etcd_key,local_ip,external_ip)
info={'Ip':external_ip,'Netmask':external_ip_netmask,'Container_name':args.container_name,'Device':new_device,'Date':time.strftime('%Y.%m.%d-%T')}
etcd_client.write(key,info)
sys.exit(0)
if args.rmip:
try:
now_ip=eval(etcd_client.read('%s%s/external_ip/%s'%(docker_etcd_key,local_ip,args.rmip)).value)
except KeyError:
print 'This external ip:%s is not use in etcd!'%args.rmip
sys.exit(1)
if now_ip['Container_name'] != args.container_name:
print 'this is external ip:%s is has used by container:%s.if you want to delete it,please input correct container:%s and external ip:%s.'%(args.rmip,now_ip['Container_name'],now_ip['Container_name'],now_ip['Ip'])
sys.exit(1)
#delete use external ip in localhost
delete_external_ip_status=((subprocess.Popen("/sbin/ifconfig %s down &>>/dev/null && echo 0 || echo 1"%(now_ip['Device']),shell=True,stdout=subprocess.PIPE)).stdout.readlines()[0]).strip('n')
if delete_external_ip_status != "0":
print 'delete external ip:%s is fail!'%args.rmip
sys.exit(1)
else:
print 'delete external ip:%s is success!'%args.rmip
key='%s%s/external_ip/%s'%(docker_etcd_key,local_ip,args.rmip)
etcd_client.delete(key)
sys.exit(0)
sys.exit(1)
建議根據自己實際環境來修改上面代碼，我這個僅是讓大家參考我的運行方式，以及可以使用這個東東來解決自己的問題，大家如果有其他的方法也可以使用。
二、運行
1、使用幫助
[root@docker-test3 code]# python modify_docker_container_firewall.py -h
usage: modify_docker_container_firewall.py [-h] [-l] [-a] [-r RM]
[-m {internal,external}]
[-s SOURCE] [-sp SPORT] [-d DEST]
[-dp DPORT] [-pm {dynamic,manual}]
[-e] [-ap ADDIP] [-rp RMIP]
container_name
It is userful tool to modify docker container firewall
positional arguments:
container_name list local docker container name
optional arguments:
-h, --help show this help message and exit
-l, --list show container firewall rules
-a, --add add container firewall rules
-r RM, --rm RM rm container firewall rules
-m {internal,external}, --mode {internal,external}
set container firewall mode
-s SOURCE, --source SOURCE
source ip view container firewall rules
-sp SPORT, --sport SPORT
source port view container firewall rules
-d DEST, --dest DEST destination ip container firewall rules
-dp DPORT, --dport DPORT
destination port view container firewall rules
-pm {dynamic,manual}, --portmode {dynamic,manual}
set container port mode
-e, --effect effect container firewall rules
-ap ADDIP, --addip ADDIP
add external ip to container
-rp RMIP, --rmip RMIP
rm external ip to container
說明：
-l是展示當前容器的所有防火墻規則，后面不加值
-a是進行增加容器防火墻規則，后面不加值
-r是刪除容器規則，后面是防火墻的id值
-m是防火墻規則的模式，有internal（內部模式）與external（外部模式），如果你使用跟宿主機一樣出口ip的話，選擇
internal，如果使用獨立的外網ip，就選擇external
-s是來源ip，后面是ip/netmask模式
-sp是來源訪問端口，后面需要輸入允許外邊訪問進來的端口
-d是指定獨立的外網ip，后面需要輸入ip值
-dp是指定訪問容器的端口，后面是屬于端口值
-pm是指定來源端口的模式，有dynamic與manual模式，如果選擇dynamic就不需要你指定來源端口值，會自動生成一個值，使
用manual的話，就需要你手動輸入一個來源端口值
-e是設置好防火墻后，應用此防火墻策略，也就是在iptables里生效，后面不加值
-ap是在本機增加獨立的外網ip，后面是ip/netmask模式
-rp是刪除本機獨立外網ip，后面是ip模式
2、查看test1的規則
目前我本機有test1-3這3個容器
[root@docker-test3 code]# docker ps -a CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES c07b67c2382a docker.ops-chukong.com:5000/centos6-http:new "/usr/bin/supervisor 40 hours ago Up 40 hours test2 7c31bbfe0091 docker.ops-chukong.com:5000/centos6-http:new "/usr/bin/supervisor 3 days ago Up 15 hours test1 5eede798f189 docker.ops-chukong.com:5000/centos6-http:new "/usr/bin/supervisor 3 days ago Exited (0) 24 hours ago test3
其中test1與test2都使用持久化固定ip了，test3沒有
現在使用智能防火墻查看test1 的防火墻
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -l This container:test1 is not firewall rule! [root@docker-test3 code]# python modify_docker_container_firewall.py test2 -l This container:test2 is not firewall rule! [root@docker-test3 code]# python modify_docker_container_firewall.py test3 -l This container:test3 info is not in etcd!
可以看到test1與test2都是沒有規則的，而test3每一使用持久化固定ip，所以沒辦法查看數據
3、添加規則
先給test1添加內部模式規則-m internal，這樣能使用docker宿主機的外網ip+port訪問
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -a -m internal -s 1.1.1.1/24 -pm dynamic -dp 22
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40030', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '1.1.1.1/24', 'Id': 1, 'Container_ip': '172.16.1.2/24'}
這樣是給與test1容器設置，允許1.1.1.1/24通過40030（使用動態模式自動生成訪問端口），訪問test1的22端口
其中test1的容器ip自動查看，不需要收到查找與手動輸入
說明
Mode是運行的模式
Container_name是對應容器名
Source_port是來源端口
Port_mode是指端口模式為動態獲取
Local_port是目的端口
Source_ip是來源ip
Id是指防火墻規則的id，后面可以通過指定id來刪除規則
Container_ip是容器的ip
以上數據均是在使用持久化故障ip腳本生成容器的時候，程序自動把數據寫入到etcd里，然后只能防火墻也通過etcd獲取數據
在給test1添加一個使用手動模式設置來源端口
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -a -m internal -s 1.1.1.1/24 -pm manual -sp 400031 -dp 22
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40030', 'Source_ip': '1.1.1.1/24', 'Local_port': '22', 'Port_mode': 'dynamic', 'Id': 1, 'Container_ip': '172.16.1.2/24'}
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '400031', 'Port_mode': 'manual', 'Local_port': '22', 'Source_ip': '1.1.1.1/24', 'Id': 2, 'Container_ip': '172.16.1.2/24'}
如果指定的來源端口相同，并且來源ip也相同會報錯
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -a -m internal -s 1.1.1.1/24 -pm manual -sp 40031 -dp 22 This rule had exist!
現在通過-l參數來查看當前test1的規則
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -l
Follow is container:test1 firewall rule!
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40030', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '1.1.1.1/24', 'Id': 1, 'Container_ip': '172.16.1.2/24'}
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40031', 'Source_ip': '1.1.1.1/24', 'Local_port': '22', 'Port_mode': 'manual', 'Id': 2, 'Container_ip': '172.16.1.2/24'}
可以看到有2個剛才輸入的規則
4、防火墻規則生效
先查看當前宿主機防火墻
[root@docker-test3 code]# iptables -t nat -L -nv Chain PREROUTING (policy ACCEPT 117K packets, 11M bytes) pkts bytes target prot opt in out source destination 15431 914K DOCKER all -- * * 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL Chain INPUT (policy ACCEPT 11906 packets, 716K bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 1462 packets, 86817 bytes) pkts bytes target prot opt in out source destination 24 1424 DOCKER all -- * * 0.0.0.0/0 !127.0.0.0/8 ADDRTYPE match dst-type LOCAL Chain POSTROUTING (policy ACCEPT 4994 packets, 234K bytes) pkts bytes target prot opt in out source destination 0 0 MASQUERADE all -- * * 172.16.0.0/16 !172.16.0.0/16 Chain DOCKER (2 references) pkts bytes target prot opt in out source destination
可以看到只有默認的nat規則，其他的沒有
現在使用-e參數來生效
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -e config firewall rule is success!
可以看到運行成功
[root@docker-test3 code]# iptables -t nat -L -nv Chain PREROUTING (policy ACCEPT 53 packets, 5242 bytes) pkts bytes target prot opt in out source destination 5 300 DOCKER all -- * * 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL Chain INPUT (policy ACCEPT 5 packets, 300 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DOCKER all -- * * 0.0.0.0/0 !127.0.0.0/8 ADDRTYPE match dst-type LOCAL Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 MASQUERADE all -- * * 172.16.0.0/16 !172.16.0.0/16 Chain DOCKER (2 references) pkts bytes target prot opt in out source destination 0 0 DNAT tcp -- !ovs2 * 1.1.1.0/24 0.0.0.0/0 tcp dpt:40030 to:172.16.1.2:22 0 0 DNAT tcp -- !ovs2 * 1.1.1.0/24 0.0.0.0/0 tcp dpt:40031 to:172.16.1.2:22
規則已經運行了
在去配置文件里看看
[root@docker-test3 code]# tail -n 12 /etc/sysconfig/iptables *nat :PREROUTING ACCEPT [2:269] :POSTROUTING ACCEPT [1739:127286] :OUTPUT ACCEPT [1739:127286] :DOCKER - [0:0] -A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER -A POSTROUTING -s 172.16.0.0/16 ! -d 172.16.0.0/16 -j MASQUERADE -A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER #follow is container:test1 firewall rule -A DOCKER -s 1.1.1.1/24 ! -i ovs2 -p tcp -m tcp --dport 40030 -j DNAT --to-destination 172.16.1.2:22 -A DOCKER -s 1.1.1.1/24 ! -i ovs2 -p tcp -m tcp --dport 40031 -j DNAT --to-destination 172.16.1.2:22 COMMIT
也是跟我們之前配置的一樣，并且每個容器規則上面都有標示下面規則是屬于哪個容器的，方便查看
5、刪除防火墻規則
當前test1 的規則
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -l
Follow is container:test1 firewall rule!
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40030', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '1.1.1.1/24', 'Id': 1, 'Container_ip': '172.16.1.2/24'}
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40031', 'Source_ip': '1.1.1.1/24', 'Local_port': '22', 'Port_mode': 'manual', 'Id': 2, 'Container_ip': '172.16.1.2/24'}
使用-r來刪除，-r后面輸入id
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -r 2
Follow is container_name:test1 new firewall rule!
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40030', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '1.1.1.1/24', 'Id': 1, 'Container_ip': '172.16.1.2/24'}
然后-e生效
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -e config firewall rule is success! [root@docker-test3 code]# iptables -t nat -L -nv Chain PREROUTING (policy ACCEPT 4 packets, 200 bytes) pkts bytes target prot opt in out source destination 3 168 DOCKER all -- * * 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL Chain INPUT (policy ACCEPT 2 packets, 120 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DOCKER all -- * * 0.0.0.0/0 !127.0.0.0/8 ADDRTYPE match dst-type LOCAL Chain POSTROUTING (policy ACCEPT 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 0 0 MASQUERADE all -- * * 172.16.0.0/16 !172.16.0.0/16 Chain DOCKER (2 references) pkts bytes target prot opt in out source destination 0 0 DNAT tcp -- !ovs2 * 1.1.1.0/24 0.0.0.0/0 tcp dpt:40030 to:172.16.1.2:22 [root@docker-test3 code]# tail -n 12 /etc/sysconfig/iptables # Completed on Fri Dec 6 10:59:13 2013 *nat :PREROUTING ACCEPT [2:269] :POSTROUTING ACCEPT [1739:127286] :OUTPUT ACCEPT [1739:127286] :DOCKER - [0:0] -A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER -A POSTROUTING -s 172.16.0.0/16 ! -d 172.16.0.0/16 -j MASQUERADE -A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER #follow is container:test1 firewall rule -A DOCKER -s 1.1.1.1/24 ! -i ovs2 -p tcp -m tcp --dport 40030 -j DNAT --to-destination 172.16.1.2:22 COMMIT
可以看到已經智能自動修改了
6、添加額外的外網ip
使用-ap來添加
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -ap 117.121.x.99/24 add external ip:117.121.x.99/24 is success! [root@docker-test3 code]# ping 117.121.x.99 -c 2 PING 117.121.x.99 (117.121.x.99) 56(84) bytes of data. 64 bytes from 117.121.x.99: icmp_seq=1 ttl=64 time=0.039 ms 64 bytes from 117.121.x.99: icmp_seq=2 ttl=64 time=0.032 ms --- 117.121.x.99 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 999ms rtt min/avg/max/mdev = 0.032/0.035/0.039/0.006 ms
可以看到已經添加成功，并且能ping通，安全起見，我把額外的外網ip第三位添加個x，防止壞人掃描。
在通過修改防火墻來設置外部模式策略
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -a -m external -pm dynamic -s all -d 117.121.x.99 -dp 22
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40030', 'Source_ip': '1.1.1.1/24', 'Local_port': '22', 'Port_mode': 'dynamic', 'Id': 1, 'Container_ip': '172.16.1.2/24'}
{'Destination_ip': '117.121.x.99', 'Mode': 'external', 'Container_name': 'test1', 'Source_port': '40033', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '0.0.0.0/0.0.0.0', 'Id': 2, 'Container_ip': '172.16.1.2/24'}
備注：其中-s all是允許所有公網ip訪問
然后生效
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -e config firewall rule is success! [root@docker-test3 code]# iptables -t nat -L -nv Chain PREROUTING (policy ACCEPT 16 packets, 1308 bytes) pkts bytes target prot opt in out source destination 1 60 DOCKER all -- * * 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL Chain INPUT (policy ACCEPT 1 packets, 60 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DOCKER all -- * * 0.0.0.0/0 !127.0.0.0/8 ADDRTYPE match dst-type LOCAL Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 MASQUERADE all -- * * 172.16.0.0/16 !172.16.0.0/16 Chain DOCKER (2 references) pkts bytes target prot opt in out source destination 0 0 DNAT tcp -- !ovs2 * 1.1.1.0/24 0.0.0.0/0 tcp dpt:40030 to:172.16.1.2:22 0 0 DNAT tcp -- !ovs2 * 0.0.0.0/0 117.121.x.99 tcp dpt:40033 to:172.16.1.2:22
然后ssh登陸試試
[root@docker-test3 code]# ssh 117.121.x.99 -l root -p 40033 The authenticity of host '[117.121.x.99]:40033 ([117.121.x.99]:40033)' can't be established. RSA key fingerprint is 39:7c:13:9f:d4:b0:d7:63:fc:ff:ae:e3:46:a4:bf:6b. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '[117.121.x.99]:40033' (RSA) to the list of known hosts. root@117.121.x.99's password: Last login: Thu Mar 12 11:04:04 2015 from 211.151.20.221 root@7c31bbfe0091:~ 11:04:57 # ifconfig eth1 Link encap:Ethernet HWaddr 66:17:20:C3:4E:21 inet addr:172.16.1.2 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::6417:20ff:fec3:4e21/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:606 errors:0 dropped:2 overruns:0 frame:0 TX packets:411 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52692 (51.4 KiB) TX bytes:45451 (44.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
可以設置的外網ip可以正常登陸到test1的容器里
7、測試批量生效防火墻策略
目前僅有test1有防火墻測試了，現在給test2也設置
[root@docker-test3 code]# python modify_docker_container_firewall.py test2 -a -m internal -s 1.1.1.1/24 -pm dynamic -dp 22
{'Mode': 'internal', 'Container_name': 'test2', 'Source_port': '40034', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '0.0.0.0/0.0.0.0', 'Id': 1, 'Container_ip': '172.16.1.4/24'}
{'Mode': 'internal', 'Container_name': 'test2', 'Source_port': '40035', 'Source_ip': '0.0.0.0/0.0.0.0', 'Local_port': '22', 'Port_mode': 'dynamic', 'Id': 2, 'Container_ip': '172.16.1.4/24'}
{'Mode': 'internal', 'Container_name': 'test2', 'Source_port': '40036', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '1.1.1.1/24', 'Id': 3, 'Container_ip': '172.16.1.4/24'}
然后我在修改一下test1的
[root@docker-test3 code]# python modify_docker_container_firewall.py test1 -a -m internal -s 2.2.2.2/24 -pm dynamic -dp 22
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40030', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '1.1.1.1/24', 'Id': 1, 'Container_ip': '172.16.1.2/24'}
{'Destination_ip': '117.121.x.99', 'Mode': 'external', 'Container_name': 'test1', 'Source_port': '40033', 'Source_ip': '0.0.0.0', 'Local_port': '22', 'Port_mode': 'dynamic', 'Id': 2, 'Container_ip': '172.16.1.2/24'}
{'Mode': 'internal', 'Container_name': 'test1', 'Source_port': '40037', 'Port_mode': 'dynamic', 'Local_port': '22', 'Source_ip': '2.2.2.2/24', 'Id': 3, 'Container_ip': '172.16.1.2/24'}
之前如果想動態生效需要知道容器名，下面可以把容器名那里輸入all，就可以生效所有已經設置的規則
[root@docker-test3 code]# python modify_docker_container_firewall.py all -e config firewall rule is success! [root@docker-test3 code]# iptables -t nat -L -nv Chain PREROUTING (policy ACCEPT 20 packets, 1914 bytes) pkts bytes target prot opt in out source destination 1 60 DOCKER all -- * * 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL Chain INPUT (policy ACCEPT 1 packets, 60 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DOCKER all -- * * 0.0.0.0/0 !127.0.0.0/8 ADDRTYPE match dst-type LOCAL Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 MASQUERADE all -- * * 172.16.0.0/16 !172.16.0.0/16 Chain DOCKER (2 references) pkts bytes target prot opt in out source destination 0 0 DNAT tcp -- !ovs2 * 1.1.1.0/24 0.0.0.0/0 tcp dpt:40030 to:172.16.1.2:22 0 0 DNAT tcp -- !ovs2 * 0.0.0.0 117.121.x.99 tcp dpt:40033 to:172.16.1.2:22 0 0 DNAT tcp -- !ovs2 * 2.2.2.0/24 0.0.0.0/0 tcp dpt:40037 to:172.16.1.2:22 0 0 DNAT tcp -- !ovs2 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:40034 to:172.16.1.4:22 0 0 DNAT tcp -- !ovs2 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:40035 to:172.16.1.4:22 0 0 DNAT tcp -- !ovs2 * 1.1.1.0/24 0.0.0.0/0 tcp dpt:40036 to:172.16.1.4:22 [root@docker-test3 code]# tail -n 15 /etc/sysconfig/iptables :POSTROUTING ACCEPT [1739:127286] :OUTPUT ACCEPT [1739:127286] :DOCKER - [0:0] -A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER -A POSTROUTING -s 172.16.0.0/16 ! -d 172.16.0.0/16 -j MASQUERADE -A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER #follow is container:test1 firewall rule -A DOCKER -s 1.1.1.1/24 ! -i ovs2 -p tcp -m tcp --dport 40030 -j DNAT --to-destination 172.16.1.2:22 -A DOCKER -s 0.0.0.0 -d 117.121.x.99 ! -i ovs2 -p tcp -m tcp --dport 40033 -j DNAT --to-destination 172.16.1.2:22 -A DOCKER -s 2.2.2.2/24 ! -i ovs2 -p tcp -m tcp --dport 40037 -j DNAT --to-destination 172.16.1.2:22 #follow is container:test2 firewall rule -A DOCKER -s 0.0.0.0/0.0.0.0 ! -i ovs2 -p tcp -m tcp --dport 40034 -j DNAT --to-destination 172.16.1.4:22 -A DOCKER -s 0.0.0.0/0.0.0.0 ! -i ovs2 -p tcp -m tcp --dport 40035 -j DNAT --to-destination 172.16.1.4:22 -A DOCKER -s 1.1.1.1/24 ! -i ovs2 -p tcp -m tcp --dport 40036 -j DNAT --to-destination 172.16.1.4:22 COMMIT
很簡單吧，比以前需要找到容器的ip，然后收到去防火墻里修改，并且修改的時候，還得計算給予的來源端口，現在是否舒服很多，以后有平臺想使用的話，直接調用就可以。
8、刪除額外的外網ip
使用rp參數
[root@docker-test3 code]# python modify_docker_container_firewall.py test2 -rp 117.121.x.99 this is external ip:117.121.x.99 is has used by container:test1.if you want to delete it,please input correct container:test1 and external ip:117.121.x.99. [root@docker-test3 code]# python modify_docker_container_firewall.py test1 -rp 117.121.x.99 delete external ip:117.121.x.99 is success!
刪除的時候，還必須制定對應的容器與額外外網ip，否則刪除失敗，但提供對于的容器與ip
[root@docker-test3 code]# ping -c2 117.121.x.99 PING 117.121.x.99 (117.121.x.99) 56(84) bytes of data. From 117.121.x.3 icmp_seq=1 Destination Host Unreachable From 117.121.x.3 icmp_seq=2 Destination Host Unreachable --- 117.121.x.99 ping statistics --- 2 packets transmitted, 0 received, +2 errors, 100% packet loss, time 1000ms pipe 2
可以看到已經刪除完成，ping不通了。
目前docker方面的文章，已經完成了：
1、安裝docker
2、動態擴容docker容器的空間
3、動態綁定volume
4、docker多主機網絡互聯
5、docker持久化固定ip
6、docker智能添加與修改防火墻
以后有空給大家分享Docker集群與平臺方面知識，希望大家多提意見。
相關文章
解決執行docker daemon命令時出錯的問題
daemon 這是docker 操作中十分常用的命令指定項，最近在運行docker daemon命令卻發生了錯誤，后來通過測試各種方法終于解決了，現在將方法分享給大家，有需要的朋友們可以參考借鑒，下面來一起看看吧。2016-11-11
本文主要介紹了查看Docker容器的IP地址的四種方法,包括docker inspect命令、結合網絡名稱、在容器內執行命令、docker network inspect命令這四種,具有一定的參考價值,感興趣的可以了解一下2025-02-02
這篇文章主要介紹了基于Docker的MongoDB實現授權訪問的方法,需要的朋友可以參考下2017-03-03![Docker File創建鏡像失敗ERROR [3/4] RUN yum -y install vim的解決](http://img.jbzj.com/images/xgimg/bcimg3.png)
Docker File創建鏡像失敗ERROR [3/4] RUN yum&nbs
文章描述了在使用DockerFile創建基于CentOS Linux 8的鏡像時遇到的問題,即無法下載vim軟件包的元數據,問題的原因是CentOS Linux 8的AppStream倉庫沒有可用的URL,為了解決這個問題,作者建議將CentOS版本修改為7,因為CentOS Linux 7的AppStream倉庫通常有可用的URL2024-11-11
這篇文章主要介紹了docker部署SpringCloud微服務項目方式,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-07-07
Docker提供了多種日志驅動來管理和提取容器日志,包括json-file、syslog、fluentd等,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2024-12-12
MySQL主從復制是指數據可以從一個MySQL數據庫服務器主節點復制到一個或多個從節點,本文主要介紹了Docker安裝mysql主從復制的實現步驟,感興趣的可以了解一下2024-03-03
本文主要介紹了Docker部署SpringBoot應用，Docker可以巧妙的解決函數庫、依賴沖突問題，具有一定的參考價值，感興趣的可以了解一下2021-11-11
淺談Docker-compose中的depends_on順序的問題解決
本文主要介紹了淺談Docker-compose中的depends_on順序的問題解決，文中通過示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2021-11-11
這篇文章主要介紹了谷歌技術人員解決Docker鏡像體積太大問題的方法，涉及虛擬機，谷歌docker鏡像構建實踐及構建工具bazel的介紹等相關內容，具有一定參考價值，需要的朋友可以了解下。2017-11-11